Shore ceased all production operations in 2012 and their products are no longer available. CCSi continues to support Shore equipment in regard to service, calibration and ISO/IEC 17025 certification.
The Model 902 automatic operating stand was developed to enhance the full potential of the (discontinued) DuroTronic™ Models 1000 & 2000 Digital Durometers.
This design offers fully automated operation, providing consistent load, controlled rate of descent and a downward motion dwell time adjustable from 0 to 99 s using the timer integral to the DuroTronic™ 2000 and the older DuroTronic™ 1000 models that were so equipped.
The Model 902 accepts information from the DuroTronic™ through an RS—232C interface and allows full SPC data collection through another interface to any IBM® compatible computer.
All Shore® Round, Digital, and most Quadrant durometer styles (except Types OO, OOO—S, and M) may also be used on the Model 902 automatic operating stand. However, the use of these durometers requires that the dwell be manually controlled using the push—button switch located on the stand and can not incorporate the electronic SPC functions of the DuroTronic™ durometers.
Recent revisions to ASTM D2240 now include specifications for durometer operating stands. The rate of descent and the distance between the durometer contact surface and the specimen are but two of the many critical testing parameters which are specified!
The Shore® operating stands (manufactured after 2003) conform to ASTM D2240 guidelines. Modification of operating stand Models 900 & 902, manufactured prior to 2003, is available at a reasonable cost.
- Precision machined aluminum frame and black anodized cast aluminum base;
- Beige powder coated housing for durability and ease of maintenance;
- Precision ground shafts and linear bearings provide smooth, positive motion;
- High quality electric motor and servos provide reliable operation and long life;
- Removable mass for improved repeatability and reproducibility;
- Vinyl dust cover.
|Throat Depth:||83 mm (3.25 inch)|
|Throat Height:||79 mm (3.125 inch)|
|Stage:||152 x 182 mm (6 x 5 inch)|
|Down Dwell:||0 to 10 s|
|Up Dwell:||0 to 180 s|
|Power (Model 902 | S1-902) :||110 VAC 60 Hz (9130—242) | 220 VAC 50 Hz (9130—243) | 110 VAC 60 Hz (9130—244) | 220 VAC 50 Hz (9130—245)|
|Weight:||16 kg (35 lb.)|
automatic operating stands, durometer operating stand, durometer stand, operating stand, standard durometer, round durometer, Shore durometer, Shore durometers, Shore hardness, Shore, Shore A, Shore D, hardness, rubber hardness, plastic, plastic hardness, indentation hardness, ebonite, ebonite hardness, rubber hardness testing, rubber testing, hardness testing, durometer hardness, testing, ASTM D2240, D2240, ASTM D1957, ISO 868, ISO 7619, JIS K6253, JIS K6251, JIS K6252, JIS K 6253, JIS K6254, JIS K6255, JIS K6256, JIS K6257, JIS K6258, JIS K6259, JIS K6260, DIN 53505, DIN 53 505, CNS, K6898, BS 903, BS 2782, BS ISO 21509, BS EN ISO 868, GB/T 10807, Asker, Asker C, SRIS0101, MIL-STD-45622A, MIL-I-45208A, MIL-STD-120, ERDEC, TRDEC, NAVSWC, DREA, 83.060, 83.080.01.