Shore ceased all production operations in 2012 and their products are no longer available. CCSi continues to support Shore equipment in regard to service, calibration and ISO/IEC 17025 certification.
The Shore® Model CV (Constant Velocity) operating stand improves the precision and accuracy of test determinations, in comparison to other Shore® non—automatic operating stands, by controlling rate of descent of the durometer, hence the force applied.
The most common causes for EV (equipment variation) or repeatability, and AV (appraiser variation) or reproducibility, in test determinations are inconsistencies in the introduction of the durometer to the test specimen.
The incorporation of a hydraulic dashpot, directly below the rack-and-pinion release mechanism, consistently controls the rate of descent, and therefore the force, of the durometer to the specimen. The unique ball-and-socket durometer mounting assembly also assures parallel application of the durometer to the specimen.
The Shore® Model CV constant velocity operating stand, by greatly reducing these variables, is the superior choice in Shore® non—automatic operating stands. It is may be used with virtually all models of Shore® durometers, and is adaptable to those of other manufacturer’s.
- Rugged cast steel and stainless steel construction;
- Precision rack & pinion height control;
- Hydraulic dashpot for precise control;
- Separate pinion block and table height adjustment;
- Removable mass for improved accuracy;
- Vinyl dust cover.
|Throat Depth:||57 mm (2.25 inch)|
|Throat Height:||114 mm (4.5 inch)|
|Stage:||95 x 55 mm (3.7 x 2.2 inch)|
|Descent Rate:||25 mm / minute (1 inch / minute)|
|Weight:||8.2 kg (18 lb.)|
durometer operating stand, durometer stand, operating stand, standard durometer, round durometer, Shore durometer, Shore durometers, Shore hardness, Shore, Shore A, Shore D, hardness, rubber hardness, plastic, plastic hardness, indentation hardness, ebonite, ebonite hardness, rubber hardness testing, rubber testing, hardness testing, durometer hardness, testing, ASTM D2240, D2240, ASTM D1957, ISO 868, ISO 7619, JIS K6253, JIS K6251, JIS K6252, JIS K 6253, JIS K6254, JIS K6255, JIS K6256, JIS K6257, JIS K6258, JIS K6259, JIS K6260, DIN 53505, DIN 53 505, CNS, K6898, BS 903, BS 2782, BS ISO 21509, BS EN ISO 868, GB/T 10807, Asker, Asker C, SRIS0101, MIL-STD-45622A, MIL-I-45208A, MIL-STD-120, ERDEC, TRDEC, NAVSWC, DREA, 83.060, 83.080.01.