Shore ceased all production operations in 2012 and their products are no longer available. CCSi continues to support Shore equipment in regard to service, calibration and ISO/IEC 17025 certification.
Standard Round Style durometers, having a presser foot area of 665 mm² (1.03 in²) may be to large to gain access to areas of a specimen to be tested.
The Shore® Round Style Half Inch Foot durometer eliminates this problem, in many instances, by incorporating a 13 mm (0.5 inch) diameter presser foot, having an area of only 132 mm² (0.2 in²) that is extended 16 mm from the housing. This enables the durometer to be used both as a standard durometer and as a ‘special’ instrument.
Improved repeatability and accuracy may be attained by mounting the durometer on a Shore® Operating Stand.
Please refer to the Shore® Durometer Selection Guide for an explanation of Shore® model, type and scale designations, as well to assure the proper selection of the Shore® durometer to suit your specific application.
|Types:||A, D, DO, O & OO|
|Presser Foot:||13 mm (0.50 in) Ø|
|Presser Foot:||16 mm Extension (0.625 inch)|
|Scale:||0 — 100, 1 Point Graduations|
|Indentor:||Extension: 2.54 mm (0.100 inch)|
|Standards:||ASTM D2240, ISO 7619, & ISO 868|
Certificate of calibration is included.
|407041300||XAHAF||A||Half Inch Contact Foot (HAF)|
|407041900||XDHAF||D||Half Inch Contact Foot (HAF)|
|407042300||XOHAF||O||Half Inch Contact Foot (HAF)|
|407042500||XOOHAF||OO||Half Inch Contact Foot (HAF)|
|407041400||XAMXHAF||A||Maximum Indicator (MX) & Half Inch Contact Foot (HAF)|
|407042000||XDMXHAF||D||Maximum Indicator (MX) & Half Inch Contact Foot (HAF)|
|407042200||XDOMXHAF||DO||Maximum Indicator (MX) & Half Inch Contact Foot (HAF)|
|407042400||XOMXHAF||O||Maximum Indicator (MX) & Half Inch Contact Foot (HAF)|
|407042800||JXAHAF||JIS A||Half Inch Contact Foot (HAF)|
|407042900||JXAMXHAF||JIS A||Maximum Indicator (MX) & Half Inch Contact Foot (HAF)|
|405030000||FWCHAF||Asker C||Half Inch Contact Foot (HAF)|
constant load, half inch foot, standard durometer, quadrant durometer, Shore durometer, Shore durometers, Shore hardness, Shore, Shore A, Shore D, hardness, rubber hardness, plastic, plastic hardness, indentation hardness, ebonite, ebonite hardness, rubber hardness testing, rubber testing, hardness testing, durometer hardness, testing, ASTM D2240, D2240, ASTM D1957, ISO 868, ISO 7619, JIS K6253, JIS K6251, JIS K6252, JIS K 6253, JIS K6254, JIS K6255, JIS K6256, JIS K6257, JIS K6258, JIS K6259, JIS K6260, DIN 53505, DIN 53 505, CNS, K6898, BS 903, BS 2782, BS ISO 21509, BS EN ISO 868, GB/T 10807, Asker, Asker C, SRIS0101, MIL-STD-45622A, MIL-I-45208A, MIL-STD-120, ERDEC, TRDEC, NAVSWC, DREA, 83.060, 83.080.01.