Shore ceased all production operations in 2012 and their products are no longer available. CCSi continues to support Shore equipment in regard to service, calibration and ISO/IEC 17025 certification.
The indentor is a critical component of the durometer, wear or damage will result in inaccurate test determinations. It is highly recommended that the indentor be replaced at each calibration interval, or when it suspected that damage has occurred.
Replacement of the indentor should only be performed by qualified calibration technicians, variance in indentor extension as little as 0.001 inch will cause dramatic differences in the determinations achieved.
Ask for Price

- Configuration: 30º Cut Cone
- Diameter: 1.40 Ø mm
- Extension: 2.54 mm
- ASTM D2240: Types A & C
- SO 868 & 7619: Type A
- Configuration: 35º Cone
- Diameter: 1.40 Ø mm
- Extension: 2.54 mm
- ASTM D2240: Types B & D
- ISO 868 & 7619: Type D
- Configuration: 2.5 mm SR
- Diameter: 4.5 Ø mm
- Extension: 2.54 mm
- ASTM D2240: Type E
- ISO 7619: Type E
- Configuration: 30º Cone
- Diameter: 0.79 Ø mm
- Extension: 1.25 mm
- ASTM D2240: Type M
- ISO 7619: Type M
- Configuration: 1.20 mm SR
- Diameter: 2.40 Ø mm
- Extension: 2.54 mm
- ASTM D2240: Types DO, O & OO
- Shore®: Type T
- Configuration: 10.7 mm SR
- Diameter: 12.0 Ø mm
- Extension: 5.0 mm
- ASTM D2240: Type OOO-S
- Shore®: Formerly Type OOO
Part Number | Description |
401012300 | IRHD Indentor |
407016600 | Type A & C Indentor |
407016700 | Type O Indentor |
407016800 | Type B & D Indentor |
407039100 | Type B & D (½ inch Foot) Indentor |
407039200 | Type A & C (½ inch Foot) Indentor |
407141600 | Type M Indentor |
407700300 | Type OO & T Indentor |
unlisted | Type OOO—S Indentor |
407800400 | Asker FWC 5.8 mm Indentor |
Index Terms: durometer parts, test blocks, rubber test blocks, durometer checker, indenter, indentor, durometer indentor, durometer indenter, durometer accessories, digital durometer, standard durometer, round durometer, Shore durometer, Shore durometers, Shore hardness, Shore, Shore A, Shore D, hardness, rubber hardness, plastic, plastic hardness, indentation hardness, ebonite, ebonite hardness, rubber hardness testing, rubber testing, hardness testing, durometer hardness, testing, ASTM D2240, D2240, ASTM D1957, ISO 868, ISO 7619, JIS K6253, JIS K6251, JIS K6252, JIS K 6253, JIS K6254, JIS K6255, JIS K6256, JIS K6257, JIS K6258, JIS K6259, JIS K6260, DIN 53505, DIN 53 505, CNS, K6898, BS 903, BS 2782, BS ISO 21509, BS EN ISO 868, GB/T 10807, Asker, Asker C, SRIS0101, MIL-STD-45622A, MIL-I-45208A, MIL-STD-120, ERDEC, TRDEC, NAVSWC, DREA, 83.060, 83.080.01.