Atom SE 20 C Clicker Press (SE 20 C) — entry-level bench press
The CCSi Atom SE 20 C Clicker Press is the most compact model in the Atom SE swing-arm lineup, sized for labs that need reliable die-cutting without the footprint or cost of a full production press. It handles synthetic and natural rubber, soft plastics, coated and uncoated textiles, leather, cardboard, and paper using single- or double-edged knives, in single or multi-layer stacks.
With a 900 × 430 mm table and 196 kN (20 ton) cutting force, the SE 20 C is right-sized for standard ASTM/ISO specimen dies and routine QC cutting, not high-volume production runs. At 630 kg, it’s the lightest press in the series and easiest to site in a smaller lab.
The swing arm is easy to maneuver, and the electrohydraulic drive runs with surprisingly little noise — a real advantage in a shared lab space. A built-in 0.30-second control delay and two-handed operation keep the press safe to run.
Features:
- 220 VAC, 3-phase, 1 HP motor
- Electrohydraulic power transmission
- Safe two-handed operation
- Automatic stroke-end setup for different knife lengths
- 90 mm maximum cutting stroke
Specifications:
| Model | Table (mm) | Arm Width (mm) | Cutting Force | Size W×D×H (mm) | Net Weight |
|---|---|---|---|---|---|
| SE 20 C | 900 × 430 | 370 | 196 kN (20 ton) | 900 × 870 × 1400 | 630 kg |
Need more table area or cutting force? See the Atom SE 25 and Atom SE 25 L Clicker Presses. CCSi also supplies standard and custom specimen cutting dies to pair with any Atom SE press.
$11,155.00
- 220 VAC, 3-phase, 20amp Hz Power Requirement;
- 1 HP motor;
- Electrohydraulic Power Transmission;
- Safe Two—Handed Operation;
- Automatic stroke end set up to use different length cutting knives without adjustment;
- Controls feature built in 0.30 s delay to ensure safe operation;
Maximum daylight between the arm plate and the machine base without cutting board (5.1 inches).
Minimum daylight between the arm plate and the machine base without cutting board (1.6 inches).
All Atom SE Series Presses have maximum cutting stroke of 90 mm (3.5 inches) and require 220 VAC, 60 Hz, 3PH for the 1 HP motor.
| Model | Table | Arm Width | Cutting Force | Size W x D x H | Net Weight, With Oil |
| mm (in.) | mm (in.) | kN (ton) | mm (in.) | kg (lb.) | |
| SE 20 C | 900 x 430 (35.4 x 16.9) | 370 (14.6) | 196 (20) | 900 x 870 x 1400 (35.4 x 34.25 x 55.1) | 630 (1386) |
rubber, press, hydraulic, rubber press, hydraulic press, cutting press, clicker press, swing arm press, Atom, Atom Presses, synthetic rubber, natural rubber, soft plastics, coated, uncoated, textiles, leather, synthetic leather, cardboard, paper, rubber cutter, die cutter, specimen cutter, cutting die.