Atom SE 25 Clicker Press (SE 25) — standard mid-size press
The CCSi Atom SE 25 Clicker Press steps up from the SE 20 C with a larger cutting table and higher tonnage, making it the standard choice for labs that need more working area or cut thicker/denser sheet stock. It handles synthetic and natural rubber, soft plastics, coated and uncoated textiles, leather, cardboard, and paper using single- or double-edged knives, in single or multi-layer stacks.
With a 1000 × 500 mm table and 245 kN (25 ton) cutting force, the SE 25 gives more room to position larger dies or multiple smaller dies at once, and enough force for heavier gauge material.
The swing arm is easy to maneuver, and the electrohydraulic drive runs with surprisingly little noise — a real advantage in a shared lab space. A built-in 0.30-second control delay and two-handed operation keep the press safe to run.
Features:
- 220 VAC, 3-phase, 1 HP motor
- Electrohydraulic power transmission
- Safe two-handed operation
- Automatic stroke-end setup for different knife lengths
- 90 mm maximum cutting stroke
Specifications:
| Model | Table (mm) | Arm Width (mm) | Cutting Force | Size W×D×H (mm) | Net Weight |
|---|---|---|---|---|---|
| SE 25 | 1000 × 500 | 500 | 245 kN (25 ton) | 1000 × 1030 × 1425 | 1030 kg |
Need a wider arm reach for larger dies, or a smaller bench footprint? See the Atom SE 25 L and Atom SE 20 C Clicker Presses. CCSi also supplies standard and custom specimen cutting dies to pair with any Atom SE press.
$15,870.00
- 220 VAC, 3-phase, 20amp Hz Power Requirement;
- 1 HP motor;
- Electrohydraulic Power Transmission;
- Safe Two—Handed Operation;
- Automatic stroke end set up to use different length cutting knives without adjustment;
- Controls feature built in 0.30 s delay to ensure safe operation;
Maximum daylight between the arm plate and the machine base without cutting board (5.1 inches).
Minimum daylight between the arm plate and the machine base without cutting board (1.6 inches).
All Atom SE Series Presses have maximum cutting stroke of 90 mm (3.5 inches) and require 220 VAC, 60 Hz, 3PH for the 1 HP motor.
| Model | Table | Arm Width | Cutting Force | Size W x D x H | Net Weight, With Oil |
| mm (in.) | mm (in.) | kN (ton) | mm (in.) | kg (lb.) | |
| SE 25 | 1000 x 500 (39.37 x 19.69) | 500 (19.69) | 245 (25) | 1000 x 1030 x 1425 (39.37 x 40.55 x56.10) | 1030 (2266) |
rubber, press, hydraulic, rubber press, hydraulic press, cutting press, clicker press, swing arm press, Atom, Atom Presses, synthetic rubber, natural rubber, soft plastics, coated, uncoated, textiles, leather, synthetic leather, cardboard, paper, rubber cutter, die cutter, specimen cutter, cutting die.