Product Description

PTC has redesigned their entire line of analog pencil style durometers. The durometers feature a shorter barrel for improved grip and a more accurate precision ground mainspring.

 

The instrument uses a dial gauge with a full 360º scale and bold, easy to read numbers. The dial scale can easily be read to ½ point accuracy. A standard maximum reading hand holds the peak reading until reset.

The dial has a ‘red zone’ to indicate unreliable readings. Readings in this area should not be reported for either Type A or D. The durometer should be used in a near vertical position, but will hold tolerance up to 90º.

Get a Quote or Purchase this Product

$935.00

Get Quote
top
PTC Analog Pencil Style 601: Features Fill 118 Copy 1 Created with Sketch.
  • Meets or exceeds SRIS 0101 or JIS K7312 specifications for Asker Type C
  • Small ½ inch Diameter Presser Foot;
  • Easy to Read 0 to 100 Point Dial;
  • 360º Dial with ‘Red Zones’;
  • Maximum Reading Hand Standard;
  • Stainless Steel Coil Mainspring;
  • Glass Dial Face;
  • Storage Case;
  • Test Block Included;
  • Accuracy of ±1 Point;
PTC Analog Pencil Style 601: Specifications Fill 118 Copy 1 Created with Sketch.
ScaleAsker C
Presser Foot: 13 mm Ø (0.5 inch Ø)
Pointer Sweep: 360º
Scale: 0 — 100, 1 Point Graduations
Accuracy: ± 1 Point
Dimensions (H x W x D): 165 x 57 x 35 mm (6.5 x 2.25 x 1.375 inch)
Finish: Black Anodized
Weight:199 g (7 oz.)
Standards:SRIS 0101 & JIS K7312

Index Terms: Fill 118 Copy 1 Created with Sketch.

PTC Durometer, PTC Durometers, Shore hardness, pocket durometer, Shore scale, hardness, rubber hardness, plastic, plastic hardness, indentation hardness, ebonite, ebonite hardness, rubber hardness testing, rubber testing, hardness testing, durometer hardness, testing, ASTM D2240, D2240, ASTM D1957, ISO 868, ISO 7619, ISO 8517, ISO 7267, ISO 21509, ISO 18517, JIS K6253, JIS K6251, JIS K6252, JIS K 6253, JIS K6254, JIS K6255, JIS K6256, JIS K6257, JIS K6258, JIS K6259, JIS K6260, JIS K7215, DIN 53505, DIN 53 505, CNS, K6898, BS 903, BS 2782, BS ISO 21509, BS EN ISO 868, GB/T 10807, Asker, Asker C, SRIS 0101, MIL-STD-45622A, MIL-I-45208A, MIL-STD-120, 83.060, 83.080, hysteresis, creep, Young’s Modulus.