Product Description

PTC has redesigned their entire line of analog pencil style durometers. The durometers feature a shorter barrel for improved grip and a more accurate precision ground mainspring.

The PTC Analog Pencil Style Durometers are manufactured to meet or exceed current ASTM D2240 specifications and designed to measure the indentation hardness of rubber, elastomers, and other rubber like substances such as neoprene, silicone, vinyl, nitrile, and butyl. They can also be used for soft plastics, felt, leather, and similar materials.

The durometer’s ½ inch diameter base is the smallest base permitted by ASTM D2240 specifications. This allows it to be used in confined or hard to reach areas other durometers cannot test.

The instrument uses a dial gauge with a full 360º scale and bold, easy to read numbers. The dial scale can easily be read to ½ point accuracy. A standard maximum reading hand holds the peak reading until reset.

The dial has a ‘red zone’ to indicate unreliable readings. Readings in this area should not be reported for either Type A or D. The durometer should be used in a near vertical position, but will hold tolerance up to 90º.

Get a Quote or Purchase this Product

$875.00

Get Quote
top
PTC Analog Pencil Style 202DO: Features Fill 118 Copy 1 Created with Sketch.
  • Meets or Exceeds ASTM D2240;
  • Small ½ inch Diameter Presser Foot;
  • Easy to Read 0 to 100 Point Dial;
  • 360º Dial with ‘Red Zones’;
  • Maximum Reading Hand Standard;
  • Stainless Steel Coil Mainspring;
  • Glass Dial Face;
  • Storage Case;
  • Test Block Included;
  • Accuracy of ±1 Point;
PTC Analog Pencil Style 202DO: Specifications Fill 118 Copy 1 Created with Sketch.
ScaleDO
Presser Foot: 13 mm Ø (0.5 inch Ø)
Pointer Sweep: 360º
Scale: 0 — 100, 1 Point Graduations
Accuracy: ± 1 Point
Dimensions (H x W x D): 165 x 57 x 35 mm (6.5 x 2.25 x 1.375 inch)
Finish: Red Anodized
Weight:199 g (7 oz.)
Standards:ASTM D2240, ISO 7619 & ISO 868

Index Terms: Fill 118 Copy 1 Created with Sketch.

PTC Durometer, PTC Durometers, Shore hardness, pocket durometer, Shore scale, hardness, rubber hardness, plastic, plastic hardness, indentation hardness, ebonite, ebonite hardness, rubber hardness testing, rubber testing, hardness testing, durometer hardness, testing, ASTM D2240, D2240, ASTM D1957, ISO 868, ISO 7619, ISO 8517, ISO 7267, ISO 21509, ISO 18517, JIS K6253, JIS K6251, JIS K6252, JIS K 6253, JIS K6254, JIS K6255, JIS K6256, JIS K6257, JIS K6258, JIS K6259, JIS K6260, JIS K7215, DIN 53505, DIN 53 505, CNS, K6898, BS 903, BS 2782, BS ISO 21509, BS EN ISO 868, GB/T 10807, Asker, Asker C, SRIS 0101, MIL-STD-45622A, MIL-I-45208A, MIL-STD-120, 83.060, 83.080, hysteresis, creep, Young’s Modulus.