Shore ceased all production operations in 2012 and their products are no longer available. CCSi continues to support Shore equipment in regard to service, calibration and ISO/IEC 17025 certification.
The quadrant style durometer, first introduced in 1915, was the first durometer in the Shore® product line!
Its small lightweight and rugged design make it ideal for manual application and determining approximate durometer hardness in unfavorable environments, such as incoming materials yet onboard a delivery vehicle.
It can be easily and safely carried in the pocket. The indentor is protected by an integral hinged guard that swings away when in use. The easy to read dial is graduated from 0 through 100 in 5 unit increments throughout a 74° dial segment. The quadrant style durometer is available in most hardness ranges.
Please refer to the Shore® Durometer Selection Guide for an explanation of Shore® model, type and scale designations, as well to assure the proper selection of the Shore® durometer to suit your specific application.
Ask for Price
- Rugged die cast aluminum frame;
- Precision bronze mainspring;
- Durable, clear acrylic dial face;
- Integral indentor guard;
- Precision independent movement;
- Rugged vinyl covered steel storage case;
- Silicone rubber test block.
|Types:||A, B, C, D, DO, O, OO & T|
|Presser Foot:||49 x 19 mm (1.93 x 0.75 inch)|
|Scale:||0—100, 5 Point Graduations|
|Indentor:||Extension: 2.54 mm (0.100 inch)|
|407010700||QT||T||The Type T designates a concave presser foot for use on curved surfaces, such as textile spools and printer rollers. Although available in the listed ASTM scales, it is not yet an approved ASTM configuration|
|407020000||QAMX||A||Maximum Hand (MX)|
|407020100||QAMX||B||Maximum Hand (MX)|
|407020200||QBMX||C||Maximum Hand (MX)|
|407020300||QCMX||D||Maximum Hand (MX)|
|407020400||QDOMX||DO||Maximum Hand (MX)|
|407020500||QOMX||O||Maximum Hand (MX)|
|407020700||QTMX||T||The Type T designates a concave presser foot for use on curved surfaces, such as textile spools and printer rollers. Although available in the listed ASTM scales, it is not yet an approved ASTM configuration|
NOTE The Type T designates a concave presser foot for use on curved surfaces, such as textile spools and printer rollers. Although available in the listed ASTM scales, it is not yet an approved ASTM configuration
standard durometer, quadrant durometer, Shore durometer, Shore durometers, Shore hardness, Shore, Shore A, Shore D, hardness, rubber hardness, plastic, plastic hardness, indentation hardness, ebonite, ebonite hardness, rubber hardness testing, rubber testing, hardness testing, durometer hardness, testing, ASTM D2240, D2240, ASTM D1957, ISO 868, ISO 7619, JIS K6253, JIS K6251, JIS K6252, JIS K 6253, JIS K6254, JIS K6255, JIS K6256, JIS K6257, JIS K6258, JIS K6259, JIS K6260, DIN 53505, DIN 53 505, CNS, K6898, BS 903, BS 2782, BS ISO 21509, BS EN ISO 868, GB/T 10807, Asker, Asker C, SRIS0101, MIL-STD-45622A, MIL-I-45208A, MIL-STD-120, ERDEC, TRDEC, NAVSWC, DREA, 83.060, 83.080.01.