CCSi ISO/IEC 17025 Instrument and Gauge Service, Calibration & Certification

CCSi specializes in the service and calibration of many types of measurement gauges including:

  • Thickness Gauges;
  • Depth Gauges;
  • Micrometers;
  • Balances, Weights & Measures;
  • Thermocouples and PRTs;
  • Thermometers & Temperature Controllers;
  • Pressure & Torque Transducers;
  • Ozone Monitors & Chambers;
  • Ovens and Environmental Chambers;
  • Calipers and More!

    Typical Calibration Includes:

    • Pre—calibration Inspection;
    • Pre—calibration Report;
    • Disassembly (where applicable);
    • Inspection;
    • Parts Replacement (with prior customer approval);
    • Reassembly;
    • Adjustment to Manufacturer’s Specifications;
    • Calibration to Manufacturer’s Specifications and Applicable Standards;
    • Calibration Report;
    • Post—Calibration Report;
    • Certificate of Calibration to applicable Standards including NIST Traceability.

    Please contact CCSi or call 1.800.742.8535 to discuss your instrument calibration or service needs.

    CCSi ISO/IEC 17025 Instrument and Gauge Service, Calibration & Certification Pricing


    • Analog Thickness Gage
    • Digital Thickness Gage
    • Dimensional Gage Blocks
    • Dimensional Gage Blocks (sets)
    • Liquid in Glass Thermometer
    • Liquid in Glass Thermometer — ITS90
    • Digital Thermometer — Pyrometer
    • Digital & Beam Balances



    • Mass (less than or equal to 10 lb, 4.54 kg)
    • Mass (greater than 10 lb, 4.54 kg)
    • Mass (sets)
    • Load Cells — Transducers
    • Pressure Gages — Transducers
    • Torque Standard (Viscometer / Rheometer)
    • Torque Wrench
    • Brookfield (or similar style) Viscometers


    • Price is exclusive of repair parts and labor.

    • Additional charges for repairs are quoted upon completion of inspection.

    • An inspection fee of $30.00 may be charged if the gauge is not repaired.

    • NIST Certification is Included in the calibration service.

    • Price includes certification to a single standard.

    • Please specify ISO, EN, ASTM, JIS, DIN, BSI, MIL, etc. in the shipping documents.

    • Certifications to additional standards are $30.00 each.


    48 Hour Rush Service is Available!

    All Calibration Standards are traceable to the National Institute of Standards and Technology (NIST). The calibration services and reports provided will meet your ISO, MIL, DoD, ANSI, ASTM, EuroNorm (EN) and other international standards, as well as proprietary inter—company standards and customer/supplier requirements including those of automobile manufacturers.

    ISO/IEC 17025 Accredited Laboratory

    “This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories. This laboratory also meets the additional program requirements in the field of calibration. This accreditation also demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 18 June 2005).”ISO/IEC 17025 Accredited Laboratory

    NIST Primary Traceability

    National Institute of Standards & Technology Primary Traceability

    NIST Report of Analysis 839.03-03-155
    NIST Report of Analysis 839.03-05-168
    NIST Report of Analysis 839.03-08-004

    OREC™ Ozone Monitors, Model DM100, Serial Numbers 318 and 748 were certified as a first level calibration source with primary traceability to NIST. Through the NIST Calibration Program, the testing was performed, and the reports prepared, by NIST at their laboratory in Gaithersburg, Maryland on July 7, 2003. OREC™ Ozone Monitor, Serial Number 748, was calibrated again on September 7, 2005. On October 15, 2007 OREC™ Ozone Monitors, Serial Numbers 318, 748 & 757, were again calibrated at the NIST facility.

    Index Terms: calibration, repair, service, certification, inspection, uncertainty, degree of uncertainty, accuracy, precision, gage, gauge, thickness gauge, thickness gage, depth gage, depth gauge, micrometer, dimensional, measurement, electronic balance, scale, electronic scale, beam balance, triple beam balance, mass, weight, weights and measures, NBS, National Bureau of Standards, NIST, traceable, traceability, thermocouples, PRT, pressure transducer, torque transucer, laboratory ovens, environmental chambers, bore gauges, surface plate, gage blocks, gauge blocks, thermometer, liquid in glass, liquid-in-glass, temperature controllers, PID, optical comparator.

    Contact CCSi to request calibration services.