CAM036C — Angled-Tip Brass Scraper Blade
The CAM036C is the outlier in CCSi’s scraper set: a 3.0″ × 3.875″ blade with an angled tip, rather than the straight edge used on the A and B models, on a 7.875″ plastic handle. The angle lets the blade sit flush against a corner or an inside edge that a flat, square-edged scraper would only partially contact.
Molds and dies used in rubber and plastics testing hold tight tolerances that a single slip with a steel tool can ruin permanently — a risk that disappears once brass is doing the scraping instead.
Choose this one when the debris you’re clearing sits in a corner radius or angled feature rather than a flat, open face.
For flat-face scraping, the straight-edge CAM036A and CAM036B are better matches.
$38.00
brass, brass tools, brass brush, brass scraper, brass plier, brass wire, wire brush, cup brush, pry bar, pry tool, pick, brass pick, screwdriver, brass pick set, o-ring removal, brass screwdriver, Delrin, scraper, mold tools, mold cleaning, nonmagnetic, non-sparking, nonsparking, non-magnetic, non magnetic, hand tools, brass hand tools.