OREC™ 0500 — 0900 Series Ozone Test Chamber Specifications

| home : instrument catalogue : orec™ ozone chambers & equipment : orec™ ozone chamber specifications |

back

request for quotation (rfq)

request for information (rfi)

download

bookmark this page

home

OREC™ 0500 — 0900 Series Ozone Test Chambers: Specifications

model:	0500	0900	0500A	0900A	0500C	0900C
test methods: ¹	c · d · g · h j · i · k · l		a · e · f · g h · i · j · k · l		a · c · d · g· f h · i · j · k · l
ozone generator:	quartz uv		corona discharge		quartz uv & corona discharge
ozone range:	0—250 pphm/vol 0—1000 pphm/vol ²		10—300 ppm/vol		0—250 pphm/vol 10—300 ppm/vol 0—1000 pphm/vol ²
air flow: cfm	0—6	0—15	10—20	10—20	10—20 0—61	10—20 0—15
system accuracy:	measurement: 3% of reading Control: 4% of set—point
temperature:	up to 90° C (194º F)
oven chamber: cm in.	61 x 46 x 51 24 x 18 x 20	76 x 76 x 76 30 x 30 x 30	61 x 46 x 51 24 x 18 x 20	76 x 76 x 76 30 x 30 x 30	61 x 46 x 51 24 x 18 x 20	76 x 76 x 76 30 x 30 x 30
oven chamber: m³ ft³	0.142 5.0	0.443 15.625	0.142 5.0	0.443 15.625	0.142 5.0	0.443 15.625
dimensions: cm in.	122 x 64 x 84 48 x 25 x 33	137 x 91 x 114 54 x 36 x 45	122 x 64 x 84 48 x 25 x 33	137 x 91 x 114 54 x 36 x 45	122 x 64 x 84 48 x 25 x 33	137 x 91 x 114 54 x 36 x 45
net weight: kg lb	180 410)	261 580)	273 600)	355 780)	282 620)	364 800

¹ Test Method References
a)	ASTM D470	crosslinked insulations and jackets for wire and cable
b)	ASTM D518	rubber deterioration—surface cracking
c)	ASTM D1149	rubber deterioration—surface ozone cracking in a chamber
d)	ASTM D1171	rubber deterioration—surface ozone cracking outdoors or chamber
e)	ASTM D1352	ozone—resisting butyl rubber insulation for wire and cable
f)	ASTM D1373	specification for medium-voltage rubber insulating tape: withdrawn in 1986
g)	ASTM D3041	testing coated fabrics—ozone cracking in a chamber: replaced by D1149
h)	ASTM D3395	rubber deterioration—dynamic ozone cracking in a chamber
i)	ASTM D4575	rubber deterioration reference and alternative method(s) for determining ozone level in laboratory test chambers, (method a only)
j)	ISO 1431—1: 1989	resistance to ozone cracking — part 1: static strain
k)	ISO 1431—2: 1994	resistance to ozone cracking — part 2: dynamic strain test
l)	ISO 1431—3: 2000	resistance to ozone cracking — part 3: reference and alternative methods for determining the ozone concentration in laboratory test chambers
² Requires the optional 2^nd UV lamp.

NIST Primary Traceability & ISO/IEC 17025 Accredited Laboratory


National Institute of Standards and Technology Primary Traceability NIST Report of Analysis 839.03-03-155 NIST Report of Analysis 839.03-05-168		ISO/IEC 17025 Accredited Laboratory Calibration Certificate 1424.01 Mechanical Testing Certificate 1424.02

Index Terms: OREC, Ozone Research Equipment Company, 0500, 0900, ozone test chambers, ozone, ozone destruction, ozone generation, ozonator, ozone generator, ozone test chamber, ozone monitor, Osmonics, ASTM D518, ASTM D1149, ASTM D1171, ASTM D3395, ASTM D4575, ASTM D470, ISO 1431, ozone research, rubber cracking, ozone resistance, rubber, crack growth, weathering, rubber deterioration, surface cracking, ozone cracking, ozone measurement, rubber test, ultraviolet, UV.

Corporate Consulting, Service & Instruments, Incorporated
221 Beaver Street • Akron, Ohio 44304 USA
Telephone: 800.742.8535 / 330.376.3600 • Facsimile: 800.229.9329 / 330.376.8500
• www.ccsi-inc.com • www.orecozone.net •