back  request for quotation (rfq) request for information (rfi) Adobe® PDF Document download bookmark this page home
Taber® Abrasion Instrument Test Performance Accessories
Taber® Abraser Test Accessories Taber® Industries
Record test details on each specimen! Specimen mounting cards (S-36 and S-36-1) provide a unique way to capture pertinent test data on each specimen.
On the back of smooth card stock is a printed test report that enables critical information to be recorded. A pressure sensitive adhesive makes these cards ideal to mount flexible specimens. Plus, they prevent the formation of wrinkles caused by the rub-action of the abrading wheels. Mounting cards are offered in 4.25 in. (108 mm) square or round formats.
Mounting sheets provide nonslip attachment. Coated on both sides with a pressure sensitive adhesive, specimen mounting sheets (S-37 and S-37-1) permit the testing of samples without a center hole. The adhesive sheet allows you to affix specimens directly to a specimen table that does not have the mounting screw. One side consists of a printed test report, permitting use of the sheet as a mounting card. Mounting sheets are offered in 4.25 in. ( square or round formats.
Specimen plates enable the testing of coatings. Taber® offers a selection of specimen plates to assist with the evaluation of coatings. Different substrates permit testing based on the usage of the product, and include: wood, steel, aluminum, zinc, glass, and plastic.
Taber® Specimen Mounting Cards   Taber® Specimen Mounting Cards
Model Number Description
Larger ImageS—36 Specimen Mounting Cards [P/N 125345], 50 pieces, 108 mm~ (4.25 inch) cards are backed with a pressure sensitive adhesive to secure textiles and other flexible test specimens, preventing wrinkles. On the obverse is a printed test record form.
Larger ImageS—36—1 Round Specimen Mounting Cards [P/N 129270], 50 pieces, same as S—36, but round.
Larger ImageS—37 Specimen Mounting Sheets [P/N 125558], 100 pieces. 108 mm~ (4.25 inch) sheets of smooth card stock are coated on both sides with a pressure sensitive latex adhesive overlaid with a protective paper that is peeled off just prior to use. The adhesive sheet is interleaved between the specimen and the abrader turntable to provide a nonslip attachment for materials such as ceramics, plastics, and glass when no center hole is present.
Larger ImageS—37—1 Round Specimen Mounting Cards [P/N 129271], 100 pieces, same as S—37, but round.
Taber® Specimen Mounting Plates   Taber® Specimen Mounting Plates
Model Number Description
Larger ImageS—16 Specimen Plates [P/N 125563], 10 pieces, 20 gauge steel, 102 mm~ (4 inch), 6 mm (0.25 inch) hole.
Larger ImageS—17 Specimen Plates [P/N 132088-1], 10 pieces, Birch Plywood, 102 mm~ (4 inch), 6 mm (0.25 inch) hole.
Larger ImageS—18 Specimen Plates [P/N 132086], 10 pieces, 20 gauge aluminum, 102 mm~ (4 inch), 6 mm (0.25 inch) hole.
Larger ImageS—31 NEMA Glass Standardization Plates [P/N 125561], 10 pieces, 102 mm (4 inch), 6 mm~ (0.25 inch) center hole, 3 mm~ (0.125 inch) thick plate glass.
Larger ImageS—34 NEMA Zinc Standardization Plates [P/N 125562], 5 pieces, 102 mm (4 inch), 6 mm~ (0.25 inch) center hole, 0.8 mm~ (0.032 inch) thick zinc.
Larger ImageS—38 Plexiglass™ Standardization Plates [P/N 121257], 10 pieces, 102 mm~ (4 inch), 3 mm~ (0.125 inch) thick, 6 mm (0.25 inch) center hole. These plates are used to calibrate the Model 155 / 255 Grit Feeder.

Index Terms: Taber Abrasion Tester, Taber abraser, abraser, Taber, abrasion, abrasion tester, abrasion test, Taber abrader, Taber Method, abrasion resistance, laminates, paper, cardboard, paper board, thermosetting resins, laminate floor covering, resilient floor coverings, wood and parquet flooring, flooring, elasticity, resistance to wear, melamine, particle board, rubber coated fabric, plastic coated fabric, coated fabric, abrasive wheels, rubbing, paint, varnish, Frick Taber Test, textiles, laminar flow, decorative laminates, glazed ceramic, unglazed ceramic, dimension stone, transparent plastic, rotary platform abrader, powder coatings, polymeric powder, wall coatings, organic coatings, pile retention, protective coatings, mar resistance, scratch resistance, grit feed method, copiers, printers, ink, thermal spray coatings, film, marking, bar code, aminoplastic resins, cloth, foil, anodized aluminum, scuffing, upholstery, anodic oxidation, bodycloth, snagging, bearding, fiber loss, HPL, glazing, safety glazing, 85.060.
Copyright © 2006 CCSi, Inc. • All Rights Reserved • Published August, 2006
Corporate Consulting, Service & Instruments, Incorporated
221 Beaver Street • Akron, Ohio 44304 USA
Telephone: 800.742.8535 / 330.376.3600 • Facsimile: 800.229.9329 / 330.376.8500