CCSi features this high quality Heat Deflection Temperature Tester (HDT) conforming to the requirements of ASTM D648 and other methods for determining the temperature at which an arbitrary deformation under a flexural load occurs on molded and sheet materials that are rigid, or semi—rigid, at a “normal temperature”.
It is designed primarily for determining this characteristic for polymers and thermoplastic elastomers having a thickness greater than 3 mm, although specimens of uniform stress distribution and a thickness greater than 1 mm, may be plied to a thickness of 3 mm or greater, to achieve meaningful empirical test determinations.
|Temperature Control:||Programmable PID, Ambient — 300 Cº|
|Specimen Sizes:||127 x 12.7 x 6 — 15 mm | 110 x 3 — 4.2 x 9.8 — 12.8 mm|
|Heat Transfer Media:||Glycerin or Silicon Oil|
|Deflection Indicator:||0.00 to 10 mm|
|Indicator Resolution:||0.01 mm|
|Specimen Load:||10, 20, 30, 50, 100, 200, 300, 500 g|
|Power:||220 VAC, 1 PH|
heat deflection temperature, HDT, aging ovens, convection ovens, gravity convection ovens, forced ventilation ovens, laboratory ovens, environmental chamber, ASTM D648, D648, ASTM E145, aging, degradable plastics, embrittlement, exposure tests, heat aging, ovens, oxidation, plastics, oxidatively degradable plastics, accelerated aging, elevated temperature, oxidative aging, rubber articles, rubber products, thermal aging, temperature fluctuation gradient, thermal endurance evaluation, thermal lag time, ventilation rate, vicat.