The MetalTek™ Model 3000—H features a hydraulic power pack and control circuit for effortless ease of loading and unloading.
A large easy—to—read dial gauge mounted on the front panel indicates the depth of the indenter ball penetration. This facilitates production testing within tolerance limits when the comparison method is employed.
The MetalTek™ Model 3000—H is ideally suited for the production testing environment and designed specifically to withstand heavy use.
The MetalTek™ Model 3000—H may be used to test the Brinell hardness of castings, forgings and flat, round or irregularly shaped metal specimens of all types.
- Easy to read dial;
- Dial selection of test force;
- Quality Brinell microscope;
- Automatic zero setting dial.
- Powder coat finish;
- Rugged construction for production testing;
- Quality hydraulic system;
- Precision ground bushings;
- Anti—friction linear bearings;
- High quality cast iron frame.
- A cost effective Brinell hardness testing solution;
- Competitive price… Advanced features;
- A wide range of affordable standard accessories;
- Service and Support by qualified technicians;
- Quick Response… Accessible Personnel!
MetalTek™ is a recognized leader in hardness testing. Researchers, design engineers, production and quality assurance specialists the have appreciated MetalTek’s experience in instrumentation design, standards and hardness testing for precision instruments that provide repeatable, error free testing. The defining difference is service!
MetalTek™ has maintained Rockwell/Brinell hardness testing standards at the widely recognized FIE Research Institute since 1979. These are standards established and certified by various national and international standards organizations, not by proprietary unregulated manufacturer’s! All MetalTek™ testers fully conform to most national and international standards, thereby assuring the user of the most truly precise instruments available!
|Model:||Bench Type, Hydraulic, Analog|
|Loads:||500 — 3000 kgf|
|Initial Load:||250 kgf|
|Incremental Loads:||250 kgf|
|Display:||Graduated 360º Analog Dial|
|Vertical Capacity:||410 mm (16.14 in.)|
|Throat Depth:||200 mm (7.87 in.)|
|Net Weight:||450 kg (992 lb.)|
|Dimensions (L x W x H):||690 x 255 x 1127 mm (27.2 x 10.1 x 44.4 in.)|
|Power:||415 VAC, 50 Hz, 3 PH, 1/3 HP MOTOR|
|Conforms To:||ASTM E10; BS EN ISO 6506; ISO 6506|
|1||200 mm Ø Testing Table|
|1||70 mm Ø “V” Groove Stage|
|1||5 mm Penetrator (with 1 ball)|
|1||10 mm Penetrator (with 1 ball)|
|1||HB 5/750 Test Block|
|1||HB 10/3000 Test Block|
|1||Telescoping Protection Sleeve|
Brinell, Brinell hardness, metal hardness test, metal hardness, metallic materials, ASTM E10, E10, Standard Test Method for Brinell Hardness of Metallic Materials, 77.040.10, hardness scale, ISO 6506, BS EN ISO 6506.