Product Description

The following product has been discontinued and this page remains online for reference only.  CCSi continues to support equipment in regard to service, calibration and ISO/IEC 17025 certification.  Please refer to Rex® Model 2000 for replacement.

The Rex® Model 1700 Durometer features a maximum reading hand. The reading is ‘held’ until the operator can view the result, thus reducing error caused by focal parallax. Additionally, hysteresis or ‘creep’, over time, may also be observed.

Rex® Durometer Model 1700: Features Fill 118 Copy 1 Created with Sketch.
  • Full size, 360º dial indicator;
  • Maximum reading hand;
  • Ergonomic zero reset;
  • ± ½ point accuracy;
  • One year warranty;
  • Rugged storage case;
  • Certificate of calibration included.
Rex® Durometer Model 1700: Specifications Fill 118 Copy 1 Created with Sketch.
Types:A, B, C, D, DO & O
Presser Foot:12.7 mm (0.50 inch) Ø
Scale:0—100, 1 point resolution
Indentor:2.54 mm (0.100 inch) extension
Dimensions:57 x 156 mm (2.25 x 6.125 inch)
Weight:170 g (6 ounces)
Standards:ASTM 2240 | ISO 7619 | ISO 868

Index Terms: Fill 118 Copy 1 Created with Sketch.

Rex Durometer, Rex Durometers, Shore hardness, pocket durometer, Shore scale, Shore A, Shore D, hardness, rubber hardness, plastic, plastic hardness, indentation hardness, ebonite, ebonite hardness, rubber hardness testing, rubber testing, hardness testing, durometer hardness, testing, ASTM D2240, D2240, ASTM D1957, ISO 868, ISO 7619, JIS K6253, JIS K6251, JIS K6252, JIS K 6253, JIS K6254, JIS K6255, JIS K6256, JIS K6257, JIS K6258, JIS K6259, JIS K6260, DIN 53505, DIN 53 505, CNS, K6898, BS 903, BS 2782, BS ISO 21509, BS EN ISO 868, GB/T 10807, Asker, Asker C, SRIS0101, MIL-STD-45622A, MIL-I-45208A, MIL-STD-120, 83.060, 83.080.01, hysteresis, creep, Young’s Modulus.