back  request for quotation (rfq) request for information (rfi) adobe® download home
|  calenders  |  extruders  |  mills  |  miscellaneous  |  mixers  |  presses  |  tire equipment  |
  1. 4" x 8" Kent 5 Roll Incline Stack, cabinet style, drive to suit
  2. 6" x 16" Vernon 3 Roll, 7.5 HP, 1 pc. base with 2 cooling cans Vernon 3 Roll Calender
  3. 6" x 16" Vernon 4 Roll Inverted “L”, 7.5 HP, 1 piece base with 2 cooling cans Vernon 4 Roll Calender
  4. 6" x 18" Vernon 5 Roll "C" Outsole Calender with quick change engraving rolls, 7.5 HP, 1 pc. base Vernon 5 Roll Calender
  5. 12" x 30" Iddon 3 Roll, late model, I/O seals, flood oil lube, herringbone gearing, 50 HP DC w/SCR, Unitized base, 4 drum stainless steel cooling can assembly Iddion 3 Roll Calender
  6. 18" x 48" Farrel Birmingham 3 Roll, direct connected, 75 HP DC/SCR, Unitized 18 x 48 Farrel 3 Roll Calender
  7. 30" x 50" Farrel Bridge 2 Roll, rebuilt to suit 30 x 50 Farrel Bridge 2 Roll Calender
  8. 22" x 64" Farrel 3 Roll, 100 HP DC, vinyl tape line
  9. 20" x 65" Farrel Dominion 3 Roll, 60 HP
  10. 24" x 66" Farrel 3 Roll, direct connected, 125 HP, Unitized 24 x 66 Farrel 3 Roll Calender
  11. 24" x 66" Farrel 4 Roll Inverted "L", direct connected, 250 HP DC/SCR, Unitized 24 x 66 Farrel 4 Roll Calender
  12. 24"x 68" Adamson 3 Roll Inverted "L", drilled rolls, direct connected, 250 HP
  1. 3¼" Royle, 5:1 L/D, 15/20 HP DC
  2. 4½" Royle, 60 HP US Varidrive Royal Hot Feed Extruder
  3. 6" NRM Strainer, 5:1 L/D, Motorized Cutoff Head
  4. 8" NRM Model 50, 5:1 L/D, no head, no drive 8” NRM Model 50
  5. 8½" Royle Strainer, 5:1 L/D, motorized cutoff head, 75/100 HP DC Royal Strainer
EXTRUDERS — Cold Feed
  1. 3¼" Royle, power feed roll, 10:1 L/D, 40 HP DC/SCR Royle Cold Feed Extruder
  2. 4½" NRM, power feed roll, 17:1 L/D, 125 HP DC/SCR NRM Cold Feed Extruder
    · Front View — NRM Cold Feed Extruder
    · SCR Controls — NRM Cold Feed Extruder
    · Berg 5 Zone TCU — NRM Cold Feed Extruder
RETURN TO TOP
  1. 16" x 40" Farrel, top cap, chrome rolls & guides, direct connected, 50 HP, Silicone Mill
  2. 16" x 42" Thropp, end cap, bullgear, 60 HP, Unitized
  3. 18" x 50" Farrel, top cap, bullgear, 75 HP, Unitized 18 x 50 Farrel Mill
  4. 22" x 22" x 60" Farrel, bullgear, flip guides, 150 HP, Unitized
    · Front View — 22x22x60 Farrel Mill
    · Rear View — 22x22x60 Farrel Mill
  5. 22" x 22" x 60" Farrel, direct connected, airbrake, 150 HP, Unitized 22 x 60 Farrel Direct Connected Mill
  6. 24" x 24" x 60" Farrel, direct connected, 200 HP, Unitized
  7. 26" x 22" x 72" Farrel bare mill, build to suit or for parts 26x22x72 Farrel bare mill, build to suit or for parts
  8. 26" x 26" x 84" Farrel, direct connected, 200 HP DC/SCR, Unitized
  9. 26" x 26" x 84" Eemco, corrugated rear roll, drive to suit
  10. 30" x 100" Bolling Drop Mill, drilled rolls, roller bearing, direct Lufkin T720 Reducer, 500 HP DC/SCR 30 x 100 Bolling Mill
MILLS — Reclaim
  1. 21" x 24" x 36" National Erie Cracker, 200 HP, airbrake, Unitized 21 x 24 x 36 National Erie Cracker
  2. 24" x 24" x 36" Farrel Cracker, seals, direct connected, 200 HP, New Falk 32:1 reducer, Unitized
RETURN TO TOP
  1. Rebuilt Singer #1 Hose Knitter, 1¼" - 1½", set up for automotive hose Singer Hose Knitter
MISCELLANEOUS — Gear Reducers
  1. Cleveland, 40:1 ratio, r/angle, 25 HP catalog at 690 RPM input
  2. Oilwell, 32.15:1 ratio, 100 HP catalog at 720 RPM input
  3. Jones, 6.06:1 ratio, 186 HP catalog at 600 RPM input
  4. Horsburg Scott, 52.3:1 ratio, 568 HP catalog at 1175 RPM input
  5. #3A/3D/F80 Mixer Unidrive Farrel Reducer, 13:1 ratio, 200/400 HP catalog, 1.15:1 rotor ratio
  6. Falk 2160YT3-B, 106.7:1, 273 HP at 1750 RPM catalog
  7. #11D/F270 Mixer Unidrive Reducer, 28.75:1, 2513 HP catalog
MISCELLANEOUS — Cooling Lines
  1. IRI 48" x 40" Ø Drum Type Strip Cooler
  2. (4) 16" x 40" Face Stainless Steel Cooling Drums setup
MISCELLANEOUS — Skivers
  1. 53" Pontotoc Skiver, 7.5 HP Variable Speed Blade, 5 HP Feed Rolls, ¼ HP Blade Grinder Pontotoc Skiver
MISCELLANEOUS — Autoclaves
  1. Adamson United, 3' x 60', 100 psi, National Board coded, 3 available
  2. Bandag 5' x 11', 100 psi, quick opening door, National Board coded Bandag 5 x 11 Autoclave
  3. Bandag 5' x 22', 100 psi, quick opening door, National Board coded Bandag 5 x 22 Autoclave
  4. WSF 6' x 11', 55 psi, quick opening door, National Board coded
MISCELLANEOUS — Bale Cutters
  1. 32" hydraulic, 7½ HP, dual palm safety
    · Front view Bale Cutter Front View
    · Rear view Bale Cutter Rear View
  2. 38" Farrel Horizontal "Pie" bale cutter
RETURN TO TOP
MISCELLANEOUS — Platens: Steam & Hot Oil
  1. 24" x 24" x 1 3/4" (14 available)
  2. 24" x 24" x 2½" (4 available)
  3. 24" x 26" x 2½" (2 available)
  4. 24" x 26" x 4" Spacer
  5. 24" x 26" x 5" Spacer
  6. 24" x 56" x 2¼" (2 available)
  7. 30" x 30" x 3" (2 available)
  8. 30" x 30" x 3" T Slotted (3 available)
  9. 32" x 32" x 2¼" (5 available)
  10. 36" x 36" x 2" (4 available)
  11. 36" x 36" x 2½" (7 available)
  12. 13" x 13' x 3" steam (2 available)
  13. 17" x 13' x 3" steam (3 available)
  14. 42" x 42" x 3" steam (6 available)
  1. Farrel "B" Lab Mixer, 4 speed, cabinet style
  2. Bolling "OM" Lab Mixer, 40 HP DC w/SCR, like new Bolling OM Mixer
  3. Farrel "00", drilled swing side, 15/30 HP, cabinet style, rebuilt Farrel #00 Mixer
  4. Farrel #1, roller bearing, swing side, 8" hopper, unidrive, dual 75 HP DC motors, unitized
  5. Farrel #3A, sleeve bearing, drilled sides, 11" hopper, conventional, 300 HP, good condition
  6. Farrel #3A, sleeve bearing, flood sides, 8"+ hopper, 100/200 HP, good condition Farrel #3A Mixer
  7. Farrel #3D, drilled sides, 8" hopper, 200 HP Farrel #3D Mixer
  8. Farrel #3D, semi-unidrive, 8" hopper, 300 HP DC/SCR Farrel #3D Mixer
  9. Farrel #9A, sleeve bearing, spray sides, 11" hopper, conventional, 300 HP
  10. Farrel #9D, roller bearing, drilled sides, 16" hopper, 4 wing, semi-unidrive, 800 HP DC/SCR
  11. Farrel #11A, sleeve bearing, cored sides, 16" hopper, semi-unidrive, 300/600 HP
  12. Farrel #11D, roller bearing, drilled sides, 11" hopper, conventional drive, 450/600 HP
  13. Farrel #11D, roller bearing, drilled sides, 16" hopper, unidrive, rebuilt, motor to suit Farrel #11D Mixer
  14. Farrel F270T Body, roller bearing, drilled sides, no hopper, slide door, fits #11A base
  15. Kobelco BB-270XG, roller bearing, drilled sides, 22" hopper, 4 wing, unidrive, 1250 HP DC Kobelco BB-270XG Mixer
  16. Farrel F270, roller bearing, drilled sides, 22" hopper, 4 wing, unidrive, motor to suit Farrel F270
  17. General Electric 1250 HP DC Mixer Motor, 500 VDC, 1150 RPM with SCR control
Information A large inventory of Mixer Bodies is also available, please contact us for a quote.
RETURN TO TOP
  1. [R27] 24" x 24" McKinnon Compression Press, 18" ram, 22" stroke, 16" opening
  2. [SS70] 24" x 24" French Oil Compression Press, 18" ram, 13" stroke, 24" opening
  3. [SS68] 24" x 24" French Oil Compression Press, 18" ram, 13" stroke, (2) 10" openings [SS68-69] 24 x 24 French Oil Press
  4. [SS25] 24" x 24" Baldwin Compression Press, 20" ram, 16" stroke, 14" opening
  5. [SS169] 24" x 24" Adamson United Compression Press, 20" ram, 18" stroke, 25" opening [SS169] 24 x 24 Adamson United Press
  6. [R28] 24" x 72" French Oil Compression Press, (2)17" rams, 20" stroke, 23" opening
  7. [R17] 26" x 26" Dunn & Boschert Presses, 12" ram, 24' stroke, 18" opening [R17] 26 x 26 Dunn & Boschert Press
  8. [SS121] 30" x 30" French Oil Compression Presses, 21" ram, 16" stroke, 16.5" opening
  9. [SS123] 30" x 30" French Oil Compression Presses, 21" ram, 16" stroke, 15" opening
  10. [SS71] 32" x 32" Erie Compression Presses, 24" ram, 22" stroke, 23" opening
  11. [SS184] 32" x 32" EEMCO Compression Press, 24" ram, 24" stroke, 30" opening [SS184] 32 x 32 EEMCO Press
  12. [R73] 32" x 32" Holmes Compression Press, 24" ram, 30" stroke, 39" opening
  13. [SS183] 36" x 36" French Oil Compression Press, 28" ram, 30" stroke, 35" opening
  14. [SS74] 36" x 36" French Oil Compression Press, 32" ram, 24" stroke, 30" opening
  15. [SS186] 42" x 42" EEMCO Compression Press, 32" ram, 20" stroke, 32" opening [SS186] 42 x 42 EEMCO Press
  16. [SS187] 42" x 42" EEMCO Compression Press, 36" ram, 24" stoke, 48" opening
  17. [R159] 50" x 50" Erie Compression Press, 42" ram, 36" stroke, 61" opening
PRESSES — C Frame
  1. [#C7] 4 Unit Upacting C-Frame Hydraulic Press, (3) 14" x 12'6" Steam Platens,
    (4) 10" Ø rams, 12/14" stroke set in pots, (1) 18" opening or (2) 7" openings C7 4 Unit C Frame Press
  2. [#C6] 5 Unit Upacting C-Frame Hydraulic Press, (3) 16" x 12' Steam Platens, (5) 6.5" Ø rams, 16/18" stroke set in pots, (1) 16" opening or (2) 6.5" openings C6 5 Unit C Frame Press
  3. [#C5] 5 Unit Upacting C-Frame Hydraulic Press, (3) 17" x 13' Steam Platens, (5) 6.5" Ø rams, 16/18" stroke set in pots, (1) 16.5" opening or (2)7" openings C5 5 Unit C Frame Press
  4. [#C1] 3 Unit Upacting C-Frame Hydraulic Press, (3) 16" x 12' Steam Platens, (3) 10" Ø rams, 10/12" stroke set in pots, (1) 14.5" opening or (2) 6" openings
PRESSES — Belt & Belt Line
  1. 44" x 30' Farrel Belt Press, (14) 10" Ø rams, 1100 Ton
  2. 50" x 30' Farrel Belt Press, (15) 12" Ø rams, 1700 Ton
  3. 50" x 25' R.D. Woods Belt Press, (6) 20" Ø rams, 2100 Ton
  4. 66" x 30' R.D. Woods Belt Press, (24) 12" Ø rams, 3000 Ton
  5. 78" x 41' Adamson United Belt Press, 5300 Ton, complete belt making operation, mills, calender, laboratory
PRESSES — Injection
  1. (3) Desma 966.084ZO, 80 Ton, Top Inject, manufactured in 1990, core lifters & many extras Desma 80 ton Press
  2. (1) Desma 904.300T, 300 Ton, 4 Station, #30 PSA Unit, mfg 1981
RETURN TO TOP
  1. Images #1 & #2: Steelastic machine for the production of quality steel belts for radial passenger and truck tires. This machine has automatic butt splice control, with cord end count positioning, and adjustable belt angle range.
  2. Image #3: Late model Allan Bradley PLC Control Panel.
  3. Image #4: 4½" NRM Cold Feed Extruder, 17:1 L/D ratio, SCR control and temperature control panel. It does not have a Steelastic "E" Head.
  4. Image not shown: Also included in the line is a Shell Type Cooling Drum Unit.
Click on item for a larger image!
Steelastic Line [1]
Image 1
Steelastic Line [2]
Image 2
Steelastic Line [3]
Image 3
Steelastic Line [4]
Image 4

Copyright © 2006 CCSi, Inc. • All Rights Reserved • Published February, 2006
Corporate Consulting, Service & Instruments, Incorporated
221 Beaver Street • Akron, Ohio 44304 USA
Telephone: 800.742.8535 / 330.376.3600 • Facsimile: 800.229.9329 / 330.376.8500
www.ccsi-inc.com www.orecozone.net