| |
| ccsi entrance |
• home |
|
| abrasion and wear resistance |
• bfgoodrich cut and chip tester |
| • byk-gardner ‘scrub type’ abrader |
| • gibitre™ astm and din abrader |
| • hung ta™ akron type abrader |
| • hung ta™ astm and din abrader |
| • hung ta™ crock meter |
| • hung ta™ flexing / abrasion tester |
| • hung ta™ martindale type abrader |
| • hung ta™ nbs type abrader |
| • hung ta™ scott crease—flex abrader |
| • hung ta™ universal type abrader |
| • taber® abrader model 5130 |
| • taber® abrader model 5150 |
| • taber® abrader model 5500 |
| • taber® abrader model 5750 |
| • taber® micro—abrader model 8000 |
| • taber® abrasive media |
| • taber® instrument accessories |
| • taber® specimen holders |
| • taber® test supplies and accessories |
| • taber® test methods reference |
| • taber® shear/scratch models 550/551 |
| • taber® scratch/mar model 710 |
| • taber® stiffness models 150E/150B |
|
| adhesion and cohesion |
• goodyear® “u” adhesion fixture |
| • hung ta™ ply adhesion tester |
| • hung ta™ tape adhesion tester |
|
| barcol (barber·colman) hardness |
• barcol hardness testers (4 models) |
|
| compression and deflection |
• elastek™ compression set fixture |
| • elastek™ tensile compression cage |
| • hung ta™ footwear compression set |
|
| density, mass and specific gravity |
• elastek™ grav-i-meter sg |
| • gibitre™ dens-i-meter em |
| • gibitre™ dens-i-meter pc |
| • gibitre™ dens-i-meter rc |
| • hildebrand™ dens-i-meter H200SG and H2000S |
| • hildebrand™ dens-i-meter H200L |
|
| dimensional measurement |
• elastek™ D926 digital gauge |
| • elastek™ D3767 analog gauge |
| • elastek™ D3767 digital gauge |
| • elastek™ D3767 specimen fixture |
|
| durometer hardness |
|
| asker® durometers |
• durometer selection guide |
| • MD—1 microdigital model |
| • digital durometer types |
| • astm type durometers |
| • jis type durometers |
| • asker® type durometers |
| • operating stands |
| ptc® durometers |
• durometer selection guide |
| • analog: E2000 series |
| • analog: classic styles |
| • analog: ergonomic styles |
| • analog: pencil styles |
| • analog: soft materials |
| • analog: composite foam (F1957) |
| • analog: gypsum board (special) |
| • digital: E2000 series |
| • digital: pencil styles |
| • durometer operating stands |
| • astm D2240 type ‘r’: all styles |
| rex® durometers |
• durometer selection guide |
| • analog: multiscale model MS—1 |
| • analog: model H1000 |
| • analog: model 1500 |
| • analog: model 1600 |
| • analog: model 1700 |
| • analog: model 2000 |
| • analog: model 2100 |
| • digital: model DD—3 |
| • digital: multiscale MS—3 |
| • accessories: DD—3 / MS—3 |
| • RDC—1 durometer calibrator |
| • SG—5000 ...the outer space gage! |
| • special durometer models |
| • type r modification |
| • test block kits |
| • operating stands and options |
| shore® durometers |
| • durometer selection guide |
| • analog: round styles |
| • analog: constant load types |
| • analog: half inch foot models |
| • analog: quadrant styles |
| • analog: pencil styles |
| • digital: S1™ modular types |
| • micro hardness: analog type m |
| • micro hardness: digital type m |
| • automatic stand selection guide |
| • automatic stand model 900 |
| • automatic stand models 902 and S1 |
| • manual stand selection guide |
| • manual stand hydraulic model cv |
| • manual stand Models dr and drcl |
| • manual stand model lr |
| • repair tools and durocalibrator™ |
| • test blocks, parts and accessories |
|
| durometer hardness (irhd) |
• gibitre™ modular irhd durometers |
| • hildebrand™ digital micro irhd type |
| • shore® irhd overview |
| • shore® irhd model 770 |
| • shore® irhd model 903 |
|
| elevated and subnormal temperature |
• elastek™ ageing oven (test tube) |
| • gibitre™ brittleness point and tr tester |
| • gibitre™ chamber type demattia |
| • gibitre™ thermostatic bath |
| • hung ta™ brittleness point tester |
| • hung ta™ programmable environmental chamber |
| • hung ta™ direct display environmental chamber |
| • hung ta™ bench-top environmental chamber |
| • hung ta™ fluid (oil) immersion bath |
| • hung ta™ forced ventilation oven |
| • hung ta™ geer type oven |
| • hung ta™ heat deflection (hdt) |
| • hung ta™ refrigeration chamber |
|
| fatigue, failure, fracture and flexure |
• bfgoodrich flexometer |
| • elastek™ emerson—ross® flex tester |
| • gibitre™ brittleness point and tr tester |
| • gibitre™ chamber type demattia |
| • gibitre™ immersion type demattia |
| • hung ta™ 3 station demattia flex tester |
| • hung ta™ footwear flex tester |
| • hung ta™ leather flex tester |
| • hung ta™ mullen type burst tester |
| • hung ta™ ross flex tester |
| • hung ta™ scott crease—flex tester |
| • hung ta™ textile flex tester |
| • hung ta™ charpy analog |
| • hung ta™ izod analog |
| • taber® stiffness models 150E/150B |
| • unitek™ charpy-izod analog |
| • unitek™ charpy-izod digital |
|
| immersion, fog, spray and humidity |
• elastek™ immersion oven |
| • gibitre™ immersion type demattia |
| • gibitre™ thermostatic bath |
| • hung ta™ programmable environmental chamber |
| • hung ta™ direct display environmental chamber |
| • hung ta™ bench-top environmental chamber |
| • hung ta™ fluid (oil) immersion bath |
| • hung ta™ maeser water penetration |
| • hung ta™ salt spray chamber |
| • hung ta™ carbon arc chamber (1) |
| • hung ta™ carbon arc chamber (2) |
| • hung ta™ water (solution) bath |
|
| orec™ ozone chambers and equipment |
• orec™ ozone chambers |
| • orec™ ozone chamber specifications |
| • orec™ accessories and options |
| • orec™ touch screen controls |
| • orec™ ozone monitors |
| • orec™ catalytic destruction units |
| • orec™ iso/nist service and calibration |
•  product bulletins: chambers |
| • product bulletins: data logger |
| • product bulletins: ozone destruction units |
| • product bulletins: ozone monitors |
|
| plasticity, melt flow and softening point |
• bfgoodrich dsr™ relaxometer |
| • elastek™ garlock flow tester |
| • elastek™ williams’ plastometer |
| • hung ta™ melt index (mi) tester |
| • hung ta™ parallel plate plastometer |
| • hung ta™ softening point (100 Cº) |
| • hung ta™ softening point (200 Cº) |
|
| pre-owned instruments |
• pre-owned curemeters, tensile testers and more! |
|
| resilience and rebound |
• gibitre™ schob type rebound |
| • hung ta™ bayshore resiliometer |
| • shore® (bayshore) resiliometer |
|
| rockwell, brinell and vickers hardness |
| • metaltek™ instrument overview |
| • metaltek™ brinell model 3000-H |
| • metaltek™ brinell model 3000-O |
| • metaltek™ brinell/rockwell rasn/b |
| • metaltek™ portable rockwell PR-1 |
| • metaltek™ rockwell model ras |
| • metaltek™ metaltek™ rockwell model rasn |
| • metaltek™ rockwell model rasn/t |
| • metaltek™ rockwell model rasn/m |
| • metaltek™ rockwell model fr/et |
| • metaltek™ rockwell model rasn/e |
| • metaltek™ vickers model VM-50 |
| • metaltek™ parts and accessories |
| • ptc® portable rockwell model 316 |
|
| tensile, torsion, elongation and tear |
• gibitre™ brittleness point and tr tester |
| • gibitre™ tension/compression tester |
| • hung ta™ tensile tester model 8011 |
| • hung ta™ tensile tester model 8311C |
| • hung ta™ tensile tester model 9101 |
| • hung ta™ tensile tester model 9102 |
| • hung ta™ tensile tester model 9103 |
| • hung ta™ tensile tester model 9111 |
| • hung ta™ tensile tester model 9112 |
| • hung ta™ tensile grips and fixtures |
| • unitek™ tensile tester model 9400 |
| • unitek™ tensile tester model 9500 |
| • unitek™ tensile tester model 9700 |
| • unitek™ universal tester model ute |
| • unitek™ accessories and options |
|
| uv, ir and sunlight exposure |
• hung ta™ carbon arc chamber (1) |
| • hung ta™ carbon arc chamber (2) |
| • hung ta™ uv discoloration tester |
| • hung ta™ uv test chamber |
|
| xdr® rheometers and viscometers |
• xdr® eXchangeable die rheometer |
| • xdr® moving die rheometer (mdr) |
| • xdr® oscillating disk rheometer (odr) |
| • xdr® mooney viscometer |
| • xdr® patent information |
| • xdr® technical paper |
|
