CCSi, Inc.
Equipment Resource Catalogue
“... the source of quality.”
National Institute of Standards and Technology
NIST Report of Analysis 839.03-03-155
NIST Report of Analysis 839.03-05-168
NIST Report of Analysis 839.03-08-004
ISO/IEC 17025
Accredited Laboratory
Calibration Certificate 1424.01
Mechanical Testing Certificate 1424.02
CCSi Equipment Resource Catalogue: Site Map
ccsi entrance
• ccsi home
buffers, grinders, nickers and notchers
• elastek™ emerson rubber buffer
• elastek™ specimen nicker for
D624
• hung ta™ charpy / izod notcher
• hung ta™ par marton rubber buffer
cutters and knives (bulk and sheet)
• elastek™ hot knife
• elastek™ laboratory bale cutter
• elastek™ laboratory sheet cutter
• elastek™ production bale cutter
• gibitre™ multistation specimen cutter
• gibitre™ volumetric specimen cutter
data acquisition systems (daq)
• ovenmaster™ data acquisition system
• rheografx™ flatbed chart recorder
• rheomaster™ data acquisition system
dies (astm specimen cutting dies)
D395 (D575 / D1229)
• cutting dies: compression set types
1 & 2
• method a and b compression cage
• method b compression set fixture
D412 (D454 / D572 / D573 / D865)
• cutting dies: standard tensile types a through f
D413
• cutting dies: adhesion types a and b
D471
• cutting dies: standard, parts
9
&
13
D518 (D1149)
• cutting dies: surface cracking methods a, b and c
D623
• cutting dies: flexing fatigue method a (rotating die)
D624
• cutting dies: tensile tear types a, b, c, t
&
cp
• nicking apparatus for dies a
&
b (tear propagation)
D746
• cutting dies: impact brittleness types i, ii
&
iii
D814
• cutting dies: transmission of volatile liquids
D816
• cutting dies: rubber cement methods b
&
c
D925
• cutting dies: surface staining methods a, b
&
c
D926
• cutting dies: mated and rotating plasticity types
D945
• cutting dies: compression and shear parts a
&
b
D991
• cutting dies: volume resistivity (electrical)
D1052
• cutting dies: ross cut growth
&
piercing device
D1053
• cutting dies: low temperature stiffness types, a, b
&
c
D1054
• cutting dies: goodyear-healey rebound
D1148
• cutting dies: heat
&
ultraviolet (uv) discoloration
D1329
• cutting dies: temperature retraction (tr)
D1460
• cutting dies: liquid immersion apparatus a and b
D1630
• cutting dies: footwear abrasion (nbs abrasion)
D1646
• cutting dies: upper
&
lower mooney viscometer
D2084
• cutting dies: oscillating disk rheometer (odr)
D2136
• cutting dies: low temperature bend test
D2137
• cutting dies: brittleness point (bp) test
D3395
• cutting dies: dynamic ozone cracking methods a
&
b
D4482
• cutting dies: extension cycling fatigue
D5963
• cutting dies: rotary drum abrader (din abrader)
D6049
• cutting dies: parallel plate compression deformation
dies (iso
&
other specimen dies)
ISO 34 (ASTM D624)
• cutting dies: tensile tear types a, b, c, t
&
cp
ISO 37 (ASTM D412)
• cutting dies: tensile types a through f
ISO 1798 (ASTM D412)
• cutting dies: cellular material types
environmental chambers
&
ovens
• elastek™
ASTM D471 & D865
test tube type ageing oven
• hung ta™ programmable environmental chamber
• hung ta™ direct display environmental chamber
• hung ta™ bench-top environmental chamber
• hung ta™ forced ventilation oven (
ASTM E145 IIA and IIB
)
• hung ta™ geer type oven (
ASTM E145 IIA and IIB
)
• hung ta™ refrigeration chamber with test fixtures
molds (astm specimen molds)
D256
• specimen molds: charpy
&
izod methods a
—
e
D395 (D575, D1229)
• specimen molds: compression test types
1
&
2
• method a
&
b compression cage
• method b compression set fixture
D412 (D454, D572, D573, D865)
• specimen molds: tensile test methods a
&
b
D429
• specimen molds: adhesion test methods a
—
g
D623
• specimen molds: flexing fatigue test methods a
&
b
D624
• specimen nicking apparatus for tensile tear dies a
&
b
D813
• specimen molds: demattia flex test
• specimen piercing tool
&
piercing tool holder
D945
• specimen molds: yerzley oscillograph test parts a
&
b
D1052
• specimen molds: ross cut growth test parts a
&
b
• specimen piercing tool
&
piercing tool holder
D1054
• specimen molds: goodyear
—
healey rebound test
D1171
• specimen molds: ozone cracking (outdoors test)
D1630
• specimen molds: footwear abrasion test (nbs abrader)
D2228
• specimen molds: pico abrasion test
D2632
• specimen molds: vertical rebound test (resilience)
D3157
• specimen molds: rubber (natural) color test
D3182
•
the standard laboratory sheet mold
D3395
• specimen molds: dynamic ozone cracking (chamber)
D3629
• specimen molds: texus cut growth test (texas)
D4482
• specimen molds: extension cycling fatigue test
D5963
• specimen molds: rotary drum abrasion test (din)
molds (iso
&
other specimen molds)
ISO 34 (ASTM D624)
• specimen nicking apparatus for tensile tear dies a
&
b
ISO 37 (ASTM D412)
• specimen molds: tensile test methods a
&
b
molds (volumetric specimen formers)
• astm
D926
volumetric former
&
rotating cutting die
• gibitre™ volumetric former (rheometer
&
viscometer)
preowned (used)
&
rebuilt equipment
• rubber calenders
• rubber extruders
• rubber mills
• rubber mixers
• rubber presses
• tire building equipment
presses (hydraulic
&
pneumatic)
• atom™ se (clicker) series presses
• elastek™
4
post presses (
100
+ ton)
• gibitre™ laboratory press
• hung ta™ multiple platen press
• hung ta™ pneumatic punch press
• indusco™ swing arm presses
• indusco™ large hydraulic presses
• indusco™ traversing head presses
presses (laboratory
&
specimen mold)
• elastek™
4
post presses (
100
+ ton)
• gibitre™ laboratory press
• hung ta™ economy laboratory press
• hung ta™ multiple platen press
presses (specimen die cutting)
• atom™ se (clicker) series presses
• elastek™ mechanical arbor press
• gibitre™ constant volume die cutter
• gibitre™ multiple station die cutter
• hung ta™ mechanical punch press
• hung ta™ pneumatic punch press
supplies, consumables
&
brass tools
• brass laboratory
&
mold tools
• curemeter (rheometer
&
viscometer) replacement parts
• mold cleaning tools, silver ink pens, gloves
&
supplies
• recorder pens, chart paper, cellophane
&
mylar sheets
CCSi… celebrating 25 years of service! 1986 — 2011
