back  request for quotation (rfq) request for information (rfi) Adobe® PDF Document download bookmark this page home
ElasTek™  Emerson — Ross Type Rubber Flexing Apparatus
Emerson — Ross Type Flexing Apparatus
ElasTek™ Emerson - Ross Model AR2
ElasTek™ Testing Instruments by CCSi
ASTM D1052 describes the Ross Type Rubber Flexing Apparatus which is designed for measuring the cut growth in rubber vulcanizates or synthetic elastomers by subjecting specifically prepared test specimens to repeated bend flexing.
The Ross Flexing Apparatus operates by clamping one end of the test specimen to an arm while the pierced end is placed between two rollers which permits a free bending movement.
During each test cycle, the pierced area of the specimen is bent freely over a 10 mm Ø rod through a 90º angle. The growth of the cut, propagated by the pierced area, is then measured, either as a function of the actual final length of the cut over a specific number of cycles, or as the number of cycles required to attain a specific percentage of the growth of the cut.
Ross Type Flexing Apparatus
Schematic Diagram of Ross Type Rubber Flexing Apparatus
A — Test Specimen E — Fixed Lower Roller
B — Holder Arm F — Supporting Fixed Lower Roller
C — Holder Arm Adjustment G — Pierced Area
D — Adjustable Top Roller H — 10 mm Ø Rod (bends specimen 90º)
The Emerson — Ross Type Rubber Flexing Apparatus Model AR2 can test 6 pair of specimens simultaneously. The specimen thickness can range from 3.175 — 6.35 mm (0.125 — 0.500 in). The number of cycles, the frequency of which is 100 cycles per minute, during the test is recorded by a digital counter. The Model AR2 is completely self contained and of a size suitable for benchtop use.
The Model AR6 Emerson — Ross Type Rubber Flexing Apparatus is designed for subnormal temperature tests. The apparatus is identical to the Model AR2, except that those components which are contained within the chamber are manufactured of high chromium content stainless steel to prevent the oxidizing effects of condensation. Emerson — Ross Environmental Chamber
AR6 Environmental Chamber
The electric gear drive motor is mounted outside of the environmental chamber and connected to the apparatus using a sealed flexible coupling device. The environmental chamber is capable of sustaining temperatures as low as — 22.2 Cº (— 40 Fº) over the entire period of the test.
The Model AR6 conforms to ASTM D1052 and FED CCC-C-501A (coated cloth). Additionally, instruments for conforming to ASTM D572 and ASTM D573 are also available.
ElasTek™  Emerson — Ross Type Flexing Apparatus: Specifications
Model AR2 AR6
Specimen Holders: 6 Station (12 Specimens)
Flexing Speed: 100 ± 5 cycles per minute
Flexing Angle: 90º Maximum
Counter: 6 Digit Electronic
Power Required: 115 VAC
Motor: 1/3 HP, Gear Drive
Temperature Range: Ambient Ambient to —22.2 Cº
Dimensions (L x W x H): 780 x 660 x 483 mm
(31 x 26 x 19 in.)
780 x 660 x 483 mm
(not including chamber)
Net Weight: 20.5 kg (45 lb.) 147.4 kg (325 lb.)
(including chamber)
List Price: Please Submit a Request for Quotation (RFQ)

Index Terms: flex tester, DeMattia, De Mattia, Ross, DeMattia flex tester, Ross flex tester, dynamic fatigue, flex fatigue, rubber vulcanizates, bend test, DuPont flexing machine, Scott flexing machine, ply separation, crack growth, cut growth, rubber deterioration, flexing fatigue, rubber products, D1052, ASTM D1052, Standard Test Method for Measuring Rubber Deterioration - Cut Growth Using Ross Flexing Apparatus, FED CCC-C-501A, EN, ISO, 20344, ISO 5423, 13.340.50.
Copyright © 2006 CCSi, Inc. • All Rights Reserved • Published August, 2006
Corporate Consulting, Service & Instruments, Incorporated
221 Beaver Street • Akron, Ohio 44304 USA
Telephone: 800.742.8535 / 330.376.3600 • Facsimile: 800.229.9329 / 330.376.8500
www.ccsi-inc.com www.orecozone.net