back  request for quotation (rfq) request for information (rfi) Adobe® PDF Document download bookmark this page home
Rex® Durometer Type R Modification: Description
Rex® Type R Modification Rex® Gauge Company
The Type R was recently introduced in ASTM D2240. The Type R directly addresses two significant issues:
  1. standardization of the presser foot configuration,
  2. harmonization with other standards, specifically ISO 7619.
Type R is a designation, rather than a true ‘type’. The Type R designation specifies a presser foot diameter of 18 ± 0.5 mm (0.71 ± 0.02 in) in diameter, while the spring forces and indentor configurations of the ‘parent type’ (previously enumerated in ASTM D2240) remain unchanged.
Durometers of the same type (scale), having different presser foot configurations, will produce different test determinations on most materials, in many cases this is a noteworthy difference.
The specification of the presser foot configuration as Type R allows an industry-wide basis for direct comparison of durometer hardness determinations. This is important in that there are fewer variables introduced, which is especially significant between customer and supplier, as well as between laboratories. Rex® Type R Presser Foot Modification
The ASTM D2240 Type R designation, while allowing users to conform to the requirements of ISO 7619 and DIN 53505, is far more comprehensive. Type R requires the use of an operating stand and, while specifying the presser foot configuration, allows these parameters to be employed with any ASTM D2240 durometer type (scale), thus the ‘parent’ relationship of the existing types.
The Type R designation is expressed as Type xR, where ‘x’ is the D2240 parent type, and ‘R’ indicates conformance to the presser foot and operating stand requirements e.g., aR; dR; etc.
Information It is important to note that while the ASTM D2240 Type R designation requires the use of an operating stand, a Type R durometer may be used as a hand-held instrument and comply with the parent ASTM D2240 specification, as well as those of ISO 7619, ISO 868 (types A & D), DIN 53505, and other methods.
The Rex® ASTM D2240 Type R modification allows incredible flexibility ... from day-to-day process controls, to strict compliance to the requirements of international QA/QC!
Rex® Durometer Type R Modification: Features
  1. May be ordered (as an option)with any new Rex® durometer type;
  2. Will retrofit most existing Rex® durometers (may require the return of the instrument);
  3. Type R compliant operating stands available for most Rex® durometers;
  4. May be used as a hand-held instrument and comply with the ASTM D2240 parent type.
Please Submit a RFQ (Request for Quotation) for current pricing and availability.

Index Terms: Rex Durometer, Rex Durometers, Shore hardness, Type R, pocket durometer, Shore scale, hardness, rubber hardness, plastic, plastic hardness, indentation hardness, ebonite, ebonite hardness, rubber hardness testing, rubber testing, hardness testing, durometer hardness, testing, ASTM D2240, D2240, ASTM D1957, ISO 868, ISO 7619, JIS K6253, JIS K6251, JIS K6252, JIS K 6253, JIS K6254, JIS K6255, JIS K6256, JIS K6257, JIS K6258, JIS K6259, JIS K6260, DIN 53505, DIN 53 505, CNS, K6898, BS 903, BS 2782, BS ISO 21509, BS EN ISO 868, GB/T 10807, Asker, Asker C, SRIS0101, MIL-STD-45622A, MIL-I-45208A, MIL-STD-120, 83.060, 83.080.01, hysteresis, creep, Young's Modulus.
Copyright © 2006 CCSi, Inc. • All Rights Reserved • Published August, 2006
Corporate Consulting, Service & Instruments, Incorporated
221 Beaver Street • Akron, Ohio 44304 USA
Telephone: 800.742.8535 / 330.376.3600 • Facsimile: 800.229.9329 / 330.376.8500
www.ccsi-inc.com www.orecozone.net