back  request for quotation (rfq) request for information (rfi) Adobe® PDF Document download bookmark this page home
PTC® e2000 Analog Style Durometers: Description
PTC® e2000 Analog Style Durometers e2000™
The PTC® e2000 Analog Style Durometers are manufactured to meet or exceed current ASTM D2240 specifications and designed to measure the indentation hardness of rubber, elastomers, and other rubber like substances such as neoprene, silicone, vinyl, nitrile, and butyl. They can also be used for soft plastics, felt, leather, and similar materials.
The durometer's 1¼ inch diameter base is ergonomically designed and provides a presser foot area suitable for testing most specimens.
The instrument uses a dial gauge with a full 360º scale and bold, easy to read numbers. The dial scale can easily be read to ½ point accuracy. A standard maximum reading hand holds the peak reading until reset.
The dial has a ‘red zone’ to indicate unreliable readings. Readings in this area should not be reported for either Type A or D. The durometer should be used in a near vertical position, but will hold tolerance up to 90º.
PTC® e2000 Analog Style Durometers: Features
  1. Meets or Exceeds ASTM D2240, ISO 7619, & ISO 868;
  2. 1¼ inch Diameter Presser Foot;
  3. 360º Dial with ‘Red Zones’;
  4. Light Weight ... easy—to—use;
  5. Maximum Reading Hand Standard;
  6. Stainless Steel Coil Mainspring;
  7. Glass Dial Face;
  8. Storage Case;
  9. Test Block Included.
Inormation Some Models may be converted to ‘Constant Load’ hand—held types with the addition of an optional attachable mass.
PTC® e2000 Analog Style Durometers: Specifications
Types: A, B, C, D, DO & O
Presser Foot: 31.75 mm Ø (1.75 inch Ø)
Pointer Sweep: 360º
Scale: 0 — 100, 1 Point Graduations
Accuracy: ± 1 Point
Finish: Type A & OO: Black Anodized
Type B: Purple Anodized
Type C: Blue Anodized
Type D & DO: Red Anodized
Standards: ASTM D2240, ISO 7619 & ISO 868
PTC® e2000 Analog Style Durometers: Pricing Information
ASTM Type Model
Type A 501A
Type B 501B
Type C 502C
Type D 502D
Type DO 502DO
Type O 501O
List Price: Please Submit a RFQ
Certificate of calibration is included.

Index Terms: PTC Durometer, PTC Durometers, Shore hardness, pocket durometer, Shore scale, hardness, rubber hardness, plastic, plastic hardness, indentation hardness, ebonite, ebonite hardness, rubber hardness testing, rubber testing, hardness testing, durometer hardness, testing, ASTM D2240, D2240, ASTM D1957, ISO 868, ISO 7619, ISO 8517, ISO 7267, ISO 21509, ISO 18517, JIS K6253, JIS K6251, JIS K6252, JIS K 6253, JIS K6254, JIS K6255, JIS K6256, JIS K6257, JIS K6258, JIS K6259, JIS K6260, JIS K7215, DIN 53505, DIN 53 505, CNS, K6898, BS 903, BS 2782, BS ISO 21509, BS EN ISO 868, GB/T 10807, Asker, Asker C, SRIS 0101, MIL-STD-45622A, MIL-I-45208A, MIL-STD-120, 83.060, 83.080, hysteresis, creep, Young's Modulus.
Copyright © 2006 CCSi, Inc. • All Rights Reserved • Published August, 2006
Corporate Consulting, Service & Instruments, Incorporated
221 Beaver Street • Akron, Ohio 44304 USA
Telephone: 800.742.8535 / 330.376.3600 • Facsimile: 800.229.9329 / 330.376.8500
www.ccsi-inc.com www.orecozone.net