back  request for quotation (rfq) request for information (rfi) Adobe® PDF Document download bookmark this page home
BFGoodrich Cut & Chip Tester Cut and Chip Tester: Description
BFGoodrich Cut and Chip Tester BFGoodrich Instruments
“The Cut and Chip Tester provides a simple, quick laboratory method to evaluate cutting and chipping resistance of rubber compounds subjected to harsh mechanical environments.”
BFGoodrich Cut and Chip Test in Progress The BFGoodrich Cut and Chip Tester was developed to predict the service performance of passenger, truck, OTR, farm, mining and industrial solid tires, tank tracks and bogey wheels, as well as industrial products such as conveyor belts that are subjected to contacting surfaces containing sharp objects (rocks, gravel, glass, metal, etc.). The test is designed to be quick, inexpensive and furnish a high level of confidence in predictive testing of actual product performance.
Shown at Left: Cut and Chip Test in Progress
Inside the BFGoodrich Cut and Chip Tester The Cut and Chip Test is performed on a prepared disk shaped specimen mounted on a rotating shaft. The disk is impacted by a tungsten carbide knife with a precision ground cutting edge. An eccentric applies the knife at a specified frequency for a specified time, both of which are selectable within a range.
Shown at Left: Inside the Cut and Chip Tester
Before and After Test Specimens from the BFGoodrich Cut and Chip Tester A pneumatic cylinder lifts the knife support arm at the completion of a pre-selected test time. The resistance to cutting and chipping is based upon the loss of material (mass and reduction of disk diameter) over the duration of the test.
Shown at Left: Specimens Before (right) After (left)
BFGoodrich Cut & Chip Tester Cut and Chip Tester: Specifications
Main Unit (W x L x H): 610 x 610 x 610 mm (24 x 24 x 24 inch)
Electrical Service: 110 - 120 VAC, 60 Hz, 1 PH, 20 Amp
Net Weight: 65 kg (143 lb.)
Specimen Size: 51 mm Ø, 13 mm (thickness), 13 mm (center hole)
2.0 inch Ø, 0.50 inch (thickness), 0.50 inch (center hole)
Specimen Rotation: 200 - 1000 RPM
Test Cycle: 0.1 - 999 minutes
Cut/Chip Cycle: 15 - 120 RPM (0.25 - 2.0 Hz)
Mass @ Knife Edge: 454 gram (others optional)
List Price: Please Submit a Request for Quotation (RFQ)

Index Terms: BF Goodrich Cut and Chip Tester, BF Goodrich, abrasion, cut, chip, abrasion resistance, tire, OTR, industrial solid, farm, mining, tank track, bogey, bogey wheel, boogey, wheels, tire test, tire testing, tread, service life, service performance.
Copyright © 2006 CCSi, Inc. • All Rights Reserved • Published August, 2006
Corporate Consulting, Service & Instruments, Incorporated
221 Beaver Street • Akron, Ohio 44304 USA
Telephone: 800.742.8535 / 330.376.3600 • Facsimile: 800.229.9329 / 330.376.8500