Brass Tools: Description & Specifications |
| Specimen molds, specimen cutting dies, specimen formers and pre-formers represent a significant investment in rubber and plastics laboratories. |
 |
| The use of steel tools to perform day—to—day operational tasks, such as prying open specimen molds or removing stubborn debris from molds and dies, may cause excessive wear or damage these very expensive items. |
|
The use of softer brass tools can extend the life of virtually any mold or die. ElasTek™ offers a variety of commonly used brass tools:
- brass brushes with American Maple hardwood handles;
- solid brass scrapers with replaceable components;
- solid brass formed rods, with applied handles;
- solid brass o-ring removal tools;
- solid brass pliers, with coated handles;
- solid brass scrapers with riveted handles;
- high speed brass bushes for pneumatic tools.
|
|
| ElasTek™ is also a source for less commonly required brass tools and invites inquiries for specific applications. |
ElasTek™ Brass Heavy Duty Mold Pry Tool |
|
|
|
ElasTek™ Brass Laboratory Tool Assortment |
|
| Part Number |
Description
(shaft º, overall length x shaft Ø, handle material, tip configuration) |
| CAM035A* |
Brass Shank, 90°, 15 x 0.125 in., Plastic Handle, Conical |
| CAM035B* |
Brass Shank, 180°, 15 x 0.125 in., Plastic Handle, Conical |
| CAM035C* |
Brass Shank, 90°, 15 x 0.1875 in., Plastic Handle, Conical |
| CAM035D* |
Brass Shank, 180°, 15 x 0.1875 in., Plastic Handle, Conical |
| CAM035E* |
Brass Shank, 180°, 15 x 0.375 in., Plastic Handle, Truncated Cylinder |
| CAM035F* |
Brass Shank, 180°, 15 x 0.375 in., Plastic Handle, Conical |
| CAM035Fx |
Brass Shank, 180°, 24 x 0.375 in., Plastic Handle, Conical |
| CAM035G* |
Brass Blade, 12 x 1 x 0.125 in., Plastic Handle, Chisel Scraper |
| CAM035Gx |
Brass Blade, 18 x 1 x 0.125 in., Plastic Handle, Chisel Scraper |
| CAM035H* |
Brass Bristle Brush, 10 x 1 x 5 in., Hardwood Handle |
| CAM035J* |
Brass Bristle Brush, 8 x 1 x 2 in., Hardwood Handle |
| CAM035K* |
Brass Shank, 90°, 15 x 0.250 in., Plastic Handle, Conical |
| CAM035L* |
Brass Shank, 180°, 15 x 0.250 in., Plastic Handle, Conical |
| CAM035Lx |
Brass Shank, 180°, 24 x 0.250 in., Plastic Handle, Conical |
| CAM035M* |
Brass Shank, 180°, 7 x 0.125 in., Plastic Handle, Conical |
| CAM035P |
Brass Bristle Brush, 3.250 x 1 x 3 in., Hardwood Handle |
| CAM035R |
Brass Bristle Brush, 8.625 x 1 x 4 in., Hardwood Handle |
| CAM035S |
Brass Bristle Brush, 14 x 1 x 6 in., Hardwood Handle |
| CAM035 |
Complete Brass Tool Kit (includes 1 each of the above) |
| CAM035x |
Small Brass Tool Kit (includes 1 each of the 12 * items) |
| List Price: |
Please Submit a Request for Quotation |
|
ElasTek™ Small Parts (Detail) Brass Service Brushes |
|
| Part Number |
Description
(service duty, bristle width x bristle width x overall length, handle material) |
| CAM031 |
Brass Bristle Brush, Light Duty, 1.375 x 2 x 7 in., Plastic Handle |
| CAM034 |
Brass Bristle Brush, Light Duty, 1.375 x 4 x 7 in., Plastic Handle |
| CAM033 |
Brass Bristle Brush (Set of 3), Light Duty, 1.25 x 2 x 7 in., Hardwood Handle |
| List Price: |
Please Submit a Request for Quotation |
|
ElasTek™ Power Attachment Type Brass Wire Brushes & Wheels |
|
| Part Number |
Brass Brush / Wheel Description
(spindle or arbor size x diameter / rated RPM) |
| CAM038 |
0.125 x 1.4375 in. / 3,000 RPM
5 Piece Brass Set Includes:
1.5 in. Wheel; 1.0 in. Wheel; 0.50 in. Mini Wheel; End Brush; Cup Brush |
| CAM037 |
Brass Cup Brush, 0.25 x 2.00 in. / 3,000 RPM |
| CAM040 |
Brass Cup Brush, 0.25 x 2.25 in. / 3,000 RPM |
| CAM039-6 |
Brass Wheel Brush, 0.625 in. arbor w/ 0.50 in. adapter, 6 in. Ø.D.,
0.016 in. Crimped Brass Plated Wire Bristles / 3,000 RPM |
| CAM039-8 |
Brass Wheel Brush, 1.25 in. arbor w/ 0.50, 0.625, 0.75, 0.875, & 1 in.
adapters, 8 in. Ø.D., 0.016 in. Crimped Brass Plated Wire Bristles / 3,000 RPM |
| List Price: |
Please Submit a Request for Quotation |
|
|
ElasTek™ Copper, Copper/Aluminum & Stainless Steel Wire Gauze |
|
| Part Number |
Gauze Description
(material, wire dimensions, roll length or pad diameter, width or quantity per box) |
| CAM022A-1 |
heavy knitted copper wire, 0.0025 x 0.020 in., 100 foot, 5 in. |
| CAM022A-4 |
heavy knitted copper wire, 0.0025 x 0.020 in., 400 foot, 5 in. |
| CAM022B-1 |
medium knitted copper wire, 0.0020 x 0.010 in., 100 foot, 5 in. |
| CAM022B-4 |
medium knitted copper wire, 0.0020 x 0.010 in., 400 foot, 5 in. |
| CAM022C-1 |
heavy knitted copper over aluminum wire, 0.0025 x 0.020 in., 100 foot, 5 in. |
| CAM022D-1 |
medium 304 stainless steel wire, 0.0020 x 0.014 in., 100 foot, 5 in. |
| CAM023A-12 |
heavy knitted copper wire, 0.0025 x 0.020 in., 4 in. Ø, 12/box |
| CAM023A-144 |
heavy knitted copper wire, 0.0025 x 0.020 in., 4 in. Ø, 144/box |
| List Price: |
Please Submit a Request for Quotation |
|
|
ElasTek™ Brass Pliers |
|
| Part Number |
Description |
| CAM041 |
Brass Blunt Nose Pliers, 8 in. overall length, serrated jaws,
2 position pivot slot, solid brass pivot bolt, foam grips |
| CAM042 |
Brass Needle Nose Pliers, 8 in. overall length, straight tapered
jaws, 1 in. long serrated tip, gripper slot for prying, foam grips |
| CAM043 |
Brass Blunt Nose Pliers, 6 in. overall length, serrated jaws,
2 position pivot slot, solid brass pivot bolt, foam grips |
| CAM044 |
Brass Needle Bent-Nose Pliers, 8 in. overall length, 45° angled
tapered jaws, 1 in. long serrated tip, gripper slot for
prying,foam grips |
| CAM045 |
Brass Groove Joint Pliers, 10 in. overall length, 1.25 in. long
serrated jaws, 5 position grooves, solid brass pivot
bolt/nut, 1 in. closed jaw opening (max,) foam grips |
| CAM046 |
Brass Sprue Type Pliers, 7 in. overall, serrated jaws 0.875 in. long,
blade opening 0.50 in., flat back, 25º face angle, brass acorn nut,
foam grips |
| CAM047 |
Brass Sprue Type Pliers, 10 in. overall, serrated jaws 1.25 in. long,
blade opening 0.75 in., flat back, 25º face angle, brass acorn nut,
foam grips |
| CAM048-6 |
Soft Plier Jaw Covers, for most 6 in. blunt nose pliers, snaps over plier jaws,
molded from polyester resin, unaffected by most chemicals, abrasion and tear
resistant, improves grip, protects surfaces from marring
12 pair minimum order |
| CAM048-8 |
Soft Plier Jaw Covers, for most 8 in. blunt nose pliers, snaps over plier jaws,
molded from polyester resin, unaffected by most chemicals, abrasion and tear
resistant, improves grip, protects surfaces from marring
12 pair minimum order |
| List Price: |
Please Submit a Request for Quotation |
|
|
ElasTek™ Brass Scrapers |
|
| Part Number |
Description
(blade width x blade length x overall tool length, handle material, blade configuration) |
| CAM036A |
1.25 x 3.625 x 7.625 in., Plastic Handle, Straight Chisel Brass Blade |
| CAM036B |
2.00 x 3.625 x 7.625 in., Plastic Handle, Straight Chisel Brass Blade |
| CAM036C |
3.00 x 3.875 x 7.875 in., Plastic Handle, Angled Chisel Brass Blade |
| CAM036E |
1.25 x 3.625 x 11.625 in., Hardwood Handle, Straight Chisel Brass Blade |
| CAM036F |
3.00 x 3.875 x 12.125 in., Hardwood Handle, Angled Chisel Brass Blade |
| CAM036G |
0.75 x 3.625 x 11.625 in., Hardwood Handle, Radius Chisel Brass Blade |
| CAM036H |
1.25 x 3.625 x 11.625 in., Hardwood Handle, Radius Chisel Brass Blade |
| List Price: |
Please Submit a Request for Quotation |
|
|
ElasTek™ Aluminum & Stainless Steel Tools |
|
| Part Number |
Description
(shaft º, overall length x shaft Ø, handle material, tip configuration) |
| CAM055A |
Aluminum Blade, 18 x 1 x 0.125 in., Plastic Handle, Chisel Scraper |
| CAM055B |
Aluminum Blade, 12 x 1 x 0.125 in., Plastic Handle, Chisel Scraper |
| CAM055C |
Stainless Bristle Brush, 8 x 1 x 2 in., Hardwood Handle |
| CAM055D |
Aluminum Shank, 90°, 32 x 0.250 in., Plastic Handle, Conical |
| List Price: |
Please Submit a Request for Quotation |
|
ElasTek™ Brass Pin, Drift & Center Punches |
|
| Part Number |
Description
Ø (diameter), length, handle configuration / handle material |
| CAM061 |
0.625 in. Ø, 8 in. full length brass, round knurled handle |
| CAM062 |
0.625 in. Ø, taper, 8 in. full length brass length,, hex handle |
| CAM063 |
3 Piece Drift Punch Set:
0.25000 in. Ø x 4 in. full length brass, hex handle
0.37500 in. Ø x 6 in. full length brass, hex handle
0.34375 in. Ø x 8 in. full length brass, round knurled handle |
| CAM064 |
4 Piece Drift Punch Set (with storage pouch):
0.375 in. Ø x 8 in. full brass length, round knurled handle
0.500 in. Ø x 8 in. full brass length, round knurled handle
0.625 in. Ø x 8 in. full brass length, round knurled handle
0.750 in. Ø x 8 in. full brass length, round knurled handle |
| CAM066 |
6 Piece Pin Punch Set (with storage box):
0.12500 in. Ø x 6 in. full length length brass, soft polymer handle w/ protective cap
0.15625 in. Ø x 6 in. full length length brass, soft polymer handle w/ protective cap
0.18750 in. Ø x 6 in. full length length brass, soft polymer handle w/ protective cap
0.25000 in. Ø x 6 in. full length length brass, soft polymer handle w/ protective cap
0.31250 in. Ø x 6 in. full length length brass, soft polymer handle w/ protective cap
0.37500 in. Ø x 6 in. full length length brass, soft polymer handle w/ protective cap |
| List Price: |
Please Submit a Request for Quotation |
|
|
ElasTek™ Brass & Soft Face (replaceable tip) Hammers |
|
| Part Number |
Description
(material, weight, dimensions, handle material) |
| CAM071 |
Solid Brass Engineers Hammer, 16 ounce, High Impact
Shatter Resistant, Fiberglass Handle, Elastomeric Grip |
| CAM072 |
Solid Brass Mallet, 24 ounce, 0.875 in. Square Face x
3.25 in. Head x 12.875 in. length overall, Hickory Handle |
| CAM073 |
Solid Brass Mallet, 24 ounce, 1.75 in. Round Face x
3.25 in. Head x 12.875 in. length overall, Hickory Handle |
| CAM074 |
Soft Face Mallet, Zinc Alloy Head, Replaceable Tips,
13 in. Length Overall, Flame Hardened Hickory Handle |
CAM074
Hammer Body |
• CAM074–04: 4 Ounce, 0.75 in. Ø Head
• CAM074–06: 6 Ounce, 1.00 in. Ø Head
• CAM074–12: 12 Ounce, 1.25 in. Ø Head
• CAM074–16: 16 Ounce, 1.50 in. Ø Head
• CAM074–32: 32 Ounce, 2.00 in. Ø Head
|
CAM074
Replaceable
Soft Faces |
• CAM074–04A: 0.75 Ø in. Amber Plastic Head
• CAM074–04B: 0.75 Ø in. Brass Head (Yellow Brass, 33% Zinc)
• CAM074–06A: 1.00 Ø in. Amber Plastic Head
• CAM074–06B: 1.00 Ø in. Brass Head (Yellow Brass, 33% Zinc)
• CAM074–06C: 1.00 Ø in. Red Vinyl Head (Medium)
• CAM074–06D: 1.00 Ø in. Green Vinyl Head (Hard)
• CAM074–06E: 1.00 Ø in. White Nylon Head (Harder)
• CAM074–12A: 1.25 Ø in. Amber Plastic Head
• CAM074–12B: 1.25 Ø in. Brass Head (Yellow Brass, 33% Zinc)
• CAM074–12C: 1.25 Ø in. Red Vinyl Head (Medium)
• CAM074–12D: 1.25 Ø in. Green Vinyl Head (Hard)
• CAM074–12E: 1.25 Ø in. White Nylon Head (Harder)
• CAM074–16A: 1.50 Ø in. Amber Plastic Head
• CAM074–16B: 1.50 Ø in. Brass Head (Yellow Brass, 33% Zinc)
• CAM074–16C: 1.50 Ø in. Red Vinyl Head (Medium)
• CAM074–16D: 1.50 Ø in. Green Vinyl Head (Hard)
• CAM074–16E: 1.50 Ø in. White Nylon Head (Harder)
• CAM074–32A: 2.00 Ø in. Amber Plastic Head
• CAM074–32B: 2.00 Ø in. Brass Head (Yellow Brass, 33% Zinc)
• CAM074–32C: 2.00 Ø in. Red Vinyl Head (Medium)
• CAM074–32D: 2.00 Ø in. Green Vinyl Head (Hard)
• CAM074–32E: 2.00 Ø in. White Nylon Head (Harder)
|
| List Price: |
Please Submit a Request for Quotation |
|
Index Terms: brass, brass tools, brass brush, brass scraper, brass plier, brass wire, wire brush, cup brush, pry bar, pry tool, pick, brass pick, screwdriver, brass pick set, o-ring removal, brass screwdriver, Delrin, scraper, mold tools, mold cleaning, nonmagnetic, non-sparking, nonsparking, non-magnetic, non magnetic, hand tools, brass hand tools.
|
|
download