back  request for quotation (rfq) request for information (rfi) Adobe® PDF Document download bookmark this page home
CCSi UltraLife Specimen Molds: ASTM D623
UltraLife TriPlate ASTM D623 Method A Specimen Mold
D623-A UltraLife TriPlate Mold
UltraLife Specimen Molds by CCSi
CCSi UltraLife molds are designed, engineered, and manufactured to produce high quality specimens, over an extended service life!
CCSi manufactures these specimen molds for the comparison of the fatigue characteristics and rate of heat generation of rubber vulcanizates when subjected to dynamic compressive strains, as indicated in ASTM D623Standard Test Methods for Rubber Property - Heat Generation and Flexing Fatigue In Compression’.
ASTM D623 employs two distinct instruments, the Goodrich Flexometer in Test Method A and the Firestone Flexometer in Test Method B.
The test specimens are also dissimilar in configuration. The Method A test specimen is often obtained by die cutting, however, it is permissible, and often preferable, to mold the specimens, which are of a cylindrical geometry. Conversely, it is necessary to mold the Method B specimens, which are shaped as the frustrum of a rectangular pyramid, as die cutting is not practical.
CCSi UltraLife Specimen Molds: Quality Manufacturing
CCSi UltraLife molds are manufactured from homogenous, solid, high carbon content A2 mold steel. Each undergoes precision grinding and CNC (Computer Numerical Control) machining to exacting requirements. The mold cavities are expertly honed and hand polished, after which the mold is industrial chrome plated. UltraLife ASTM D623 Method B Specimen Mold
D623-B UltraLife Mold
Precision grinding ensures a parallel surface profile of the platens and CNC machining provides ultra-close dimensional tolerances, while the honing and polishing processes guarantee smooth, true specimen cavities. The durable, hard chrome finish resists the corrosive and adhesive effects of most compounds, greatly improving overall durability and ease of maintenance.
The CCSi UltraLife mold platens are thicker than standard molds, providing superior heat and pressure distribution, as well as extending the mold's useful life by resisting distortion. This also allows the overflow recesses to be deeper, reducing problems associated overfill. The platens are positively positioned with precision guide pins and receivers ... assuring precise closure!
CCSi UltraLife Specimen Molds: Innovative Design
CCSi UltraLife molds feature a unique cam-action hinge design which improves the critical distribution of pressure. Typical ‘fixed-hinge' designs cause material to flow, outwardly, from this constraining point. This uneven application of pressure may cause excessive overfill, or cavity voids. The cam-action hinge design has all of the advantages of ‘stacked plate’ molds, combined with the convenience of ‘fixed-hinge’ designs! NOTE-1
The handles are manufactured from 304 stainless steel (a chromium - nickel austenitic alloy) and contain integral support pins. This allows the handles to rotate, which facilitates opening the mold. The handles are ergonomically positioned to ease placement and removal from the heated laboratory press. NOTE-1
Large triangular pry slots are located at the corners, opposite the cam-action hinges. These further facilitate mold opening and reduce the occurrence of cavity damage from improperly positioned tools.
CCSi UltraLife Specimen Molds: Unique TriPlate Configuration
UltraLife TriPlate ASTM D623 Method A Specimen Mold
D623-A UltraLife TriPlate Mold
The CCSi UltraLife TriPlate is a unique 3 platen mold designed specifically for specimens which are typically difficult to extract.
The TriPlate features a tertiary, centrally positioned, side-mounted platen, which precisely mold-forms the specimen between two 90º opposed plates. It opens to expose both horizontal specimen surfaces, greatly easing specimen removal.
Thicker specimens, which are prepared in dual platen laboratory molds, are often subject to damage caused by the difficulty of extraction. Specimen damage may go unnoticed, adversely affecting the repeatability and reproducibility of test determinations.
The CCSi UltraLife TriPlate configuration virtually eliminates the potential for specimen deformation caused by extraction, reducing the need for repeat testing and improving test results!
CCSi UltraLife Specimen Molds: Features
The CCSi ASTM D623 Specimen Molds Feature:
  1. Exclusive UltraLife engineering;
  2. Designed with advanced 3D solid modeling;
  3. Manufactured using computerized systems and techniques;
  4. CNC (Computer Numerical Control) 4 axis machining;
  5. Precision ground;
  6. Expertly honed;
  7. Finely polished;
  8. High carbon content A2 mold steel;
  9. Thicker plates resist warping, distribute heat and pressure evenly;
  10. Cam action hinges prevent uneven closure;
  11. Industrial chrome plate finish;
  12. 304 stainless steel rotating handles ease opening, closing and handling;
  13. Deep overflow recesses (flash pockets) reduce overfill problems;
  14. Precision locator pins & receivers assure positive alignment;
  15. High strength fasteners resist the effects of strain and stress;
  16. Temperature probe orifices may be added for profiling;
  17. Optional finishes are available for highly corrosive compounds.
Available in:
  1. ASTM D623 UltraLife Method A;
  2. ASTM D623 UltraLife Method B;
  3. ASTM D623 UltraLife TriPlate Method A.

NOTE-1 handles and hinges are not offered in all D623 designs.
CCSi UltraLife ASTM D623 Specimen Molds: Specifications & Pricing
Part Number Mold Configuration Specimen Size NOTE-2
CCS-MD623-A-82 Method A - 08 Cavity - 2 Plate 17.8 ± 0.1 Ø x 25.0 ± 0.15 mm A
(0.7 ± 0.004 Ø x 0.98 ± 0.006 inch)
18.0 ± 0.05 Ø x 25.78 ± 0.05 mm B
(0.709 ± 0.002 Ø x 1.015 ± 0.002 inch)
CCS-MD623-A-83 Method A - 08 Cavity - TriPlate
CCS-MD623-B-12 Method B - 01 Cavity - 2 Plate 54 x 28.6 - 50.8 x 25.4 - 38.1 mm
(2.125 x 1.125 - 2.0 x 1.0 - 1.5 inch)
Please Request a Quotation for current pricing and delivery.
NOTE-2 Please refer to Section 9.1 and Note 4 in ASTM D623 regarding the dimensions of Method A specimens.
Where:
A is the suggested specimen dimensions when die cut, and
B is the recommended mold cavity dimensions, which allows for typical shrinkage.

Index Terms: specimen molds, molds, Standard Test Methods for Rubber Property - Heat Generation and Flexing Fatigue In Compression, ASTM D623, D623, Goodrich Flexometer, Firestone Flexometer, flexometer, flexing fatigue, flexing fatigue in compression, compressive force, flexing, flexing compression, static compression, fatigue, Emerson Type rubber buffer.
Copyright © 2006 CCSi, Inc. • All Rights Reserved • Published August, 2006
Corporate Consulting, Service & Instruments, Incorporated
221 Beaver Street • Akron, Ohio 44304 USA
Telephone: 800.742.8535 / 330.376.3600 • Facsimile: 800.229.9329 / 330.376.8500
www.ccsi-inc.com www.orecozone.net