back  request for quotation (rfq) request for information (rfi) Adobe® PDF Document download bookmark this page home
CCSi UltraLife Specimen Mold: ASTM D2632
UltraLife ASTM D2632 Mold
D2632 UltraLife Specimen Mold
UltraLife Specimen Molds by CCSi
CCSi UltraLife molds are designed, engineered, and manufactured to produce high quality specimens, over an extended service life!
CCSi manufactures these specimen molds for the determination of impact resilience of solid rubber from measurement of the vertical rebound of a falling (dropped) mass, as described in ASTM D2632Rubber Property—Resilience by Vertical Rebound.”
The Vertical Rebound Resilience is a ratio of the rebound height to the initial (drop) height of a metal plunger, of a prescribed mass and geometry, which vertically impacts the specimen.
The resilience is a function of both dynamic modulus and internal friction of the material. The test determinations are sensitive to temperature and to the depth of penetration of the plunger.
CCSi features both the Shore® (Bayshore) Resiliometer and the Hung Ta™ Vertical Rebound Resilience Tester (Bayshore Type), as well as the calibration device used for these instruments.
CCSi UltraLife Specimen Molds: Quality Manufacturing
CCSi UltraLife molds are manufactured from homogenous, solid, high carbon content A2 mold steel. Each undergoes precision grinding and CNC (Computer Numerical Control) machining to exacting requirements. The mold cavities are expertly honed and hand polished, after which the mold is industrial chrome plated.
Precision grinding ensures a parallel surface profile of the platens and CNC machining provides ultra-close dimensional tolerances, while the honing and polishing processes guarantee smooth, true specimen cavities. The durable, hard chrome finish resists the corrosive and adhesive effects of most compounds, greatly improving overall durability and ease of maintenance.
The CCSi UltraLife mold platens are thicker than standard molds, providing superior heat and pressure distribution, as well as extending the mold's useful life by resisting distortion. This also allows the overflow recesses to be deeper, reducing problems associated overfill. The platens are positively positioned with precision guide pins and receivers ... assuring precise closure!
CCSi UltraLife Specimen Molds: Innovative Design
CCSi UltraLife molds feature a unique cam-action hinge design which improves the critical distribution of pressure. Typical ‘fixed-hinge' designs cause material to flow, outwardly, from this constraining point. This uneven application of pressure may cause excessive overfill, or cavity voids. The cam-action hinge design has all of the advantages of ‘stacked plate’ molds, combined with the convenience of ‘fixed-hinge’ designs!
The handles are manufactured from 304 stainless steel (a chromium - nickel austenitic alloy) and contain integral support pins. This allows the handles to rotate, which facilitates opening the mold. The handles are ergonomically positioned to ease placement and removal from the heated laboratory press.
Large triangular pry slots are located at the corners, opposite the cam-action hinges. These further facilitate mold opening and reduce the occurrence of cavity damage from improperly positioned tools.
CCSi UltraLife Specimen Molds: Features
The CCSi ASTM D2632 Specimen Molds Feature:
  1. Exclusive UltraLife engineering;
  2. Designed with advanced 3D solid modeling;
  3. Manufactured using computerized systems and techniques;
  4. CNC (Computer Numerical Control) 4 axis machining;
  5. Precision ground;
  6. Expertly honed;
  7. Finely polished;
  8. High carbon content A2 mold steel;
  9. Thicker plates resist warping, distribute heat and pressure evenly;
  10. Cam action hinges prevent uneven closure;
  11. Industrial chrome plate finish;
  12. 304 stainless steel rotating handles ease opening, closing and handling;
  13. Deep overflow recesses (flash pockets) reduce overfill problems;
  14. Precision locator pins & receivers assure positive alignment;
  15. High strength fasteners resist the effects of strain and stress;
  16. Temperature probe orifices may be added for profiling;
  17. Optional finishes are available for highly corrosive compounds.
Available in:
  1. ASTM D2632 UltraLife 8 Cavity Mold.
CCSi UltraLife ASTM D2632 Specimen Molds: Specifications & Pricing
Part Number Mold Configuration Specimen Size
CCS-MD2632-8 D2632 8 Cavity, 2 Plate Specimen Mold Ø 25 ± 0.4 x 12.5 ± 0.5 mm
(Ø 0.98 ± 0.08 x 0.50 ± 0.02 in.)
Please Request a Quotation for current pricing and delivery.

Index Terms: molds, test specimen molds, Rubber Property - Resilience by Vertical Rebound, Rebound Resilience Tester, Bayshore, Vertical Rebound, Resilience, ASTM D2632, Pendulum Rebound, Vertical, Pendulum, rebound, rebound resilience.
Copyright © 2006 CCSi, Inc. • All Rights Reserved • Published August, 2006
Corporate Consulting, Service & Instruments, Incorporated
221 Beaver Street • Akron, Ohio 44304 USA
Telephone: 800.742.8535 / 330.376.3600 • Facsimile: 800.229.9329 / 330.376.8500
www.ccsi-inc.com www.orecozone.net