back  request for quotation (rfq) request for information (rfi) Adobe® PDF Document download bookmark this page home
CCSi UltraLife Specimen Cutting Dies: ASTM D945
CCSi is offering a 10% discount on our UltraLife Specimen Cutting Dies during December, 2010.
All purchase orders must be postmarked or recieved no later than January 5th, 2011 to qualify.
ASTM D945 Specimen Cutting Die
D945 Part A (solid rubber) Die
UltraLife Cutting Dies by CCSi
CCSi manufactures these high quality UltraLife Specimen Cutting Dies for measuring the mechanical properties of rubber vulcanizates in a small range of deformation employing the Yerzley Mechanical Oscillograph, as described in ASTM D945Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)’.
These mechanical properties include resilience, dynamic modulus, static modulus, kinetic energy, creep or hysteresis, and compression set by a specified force. Part A of the method describes Measurements in Compression and Part B addresses Measurements in Shear.
Part A, Measurements in Compression, separately addresses two materials, solid rubber and cellular materials. Each of which require differently configured specimens and preparation procedures.
Part A, solid rubber specimens, is further divided by units of measure employed in the performance of the test, those being SI and inch-pound units. The dimensions of the SI specimen are 19.5 ± 0.13 mm Ø, 12.5 ± 0.25 mm thick, with a nominal area of 300 mm² and a ‘shape factor’ of 0.390. The dimensions of the inch-pound specimens are 0.75 ± 0.005 inch Ø, 0.5 ± 0.010 inch thick, with a nominal area of 0.442 in² and a ‘shape factor’ of 0.375. ASTM D945 Rotating Volumetric Specimen Cutting Die
D945 Part A (cellular) Die
Part A, cellular specimens, requires that the cutting die, 43.70 ± 0.01 mm (1.720 ± 0.001 inch) ID having an area of 15.0 cm² (2.323 in²), be rotated during the process of obtaining the specimen from the test piece. This CCSi specimen cutting die is equipped with a special integral 0.375 inch diameter shaft, facilitating its mounting in a drill press, or similar device.
Part A test specimens may be obtained from specially prepared molded test pieces or from finished articles. When obtained from articles, the specimens must be plied to the specified thickness, or when thicker than required, finished by buffing or grinding.
D945 Part B Specimen Die
D945 Part B Specimen Die
CCSi features the Emerson Type Rubber Buffer and the Hung Ta™ Par-Marton Type Specimen Adjuster, both of which are suitable for this application and comply with the requirements of ASTM D3183Standard Practice for Rubber — Preparation of Pieces for Test Purposes from Products’.
Part B, Measurements in Shear, requires a rectangularly configured test specimen. These are also divided by units of measure employed in the performance of the test, that also being SI and inch-pound units.
The dimensions of the SI specimen are 12.7 ± 0.02 mm in width, 23.62 ± 0.02 mm in length, and 12.5 ± 0.25 mm in thickness, having a nominal area of 600 mm². The dimensions of the inch-pound specimens are 0.50 ± 0.001 inch in width, 0.884 ± 0.010 inch length, 0.50 ± 0.001 inch in thickness, with a nominal area of 0.884 in².
CCSi UltraLife Specimen Dies: Quality Manufacturing
CCSi UltraLife specimen cutting dies are manufactured from homogenous, solid, high carbon content A2 tool steel. Each undergoes multi-axis precision grinding and conventional, plunge, or wire EDM (Electrical Discharge Machining) processes ... producing a world-class, close tolerance die.
Precision grinding and EDM processes ensure true parallelism and multi-plane dimensional accuracy. The quality of materials, design, and engineering serve to provide the highest specimen quality possible, over an extended service life.
Where highly technical manufacturing techniques and processes end ... old-world craftsmanship begins!
CCSi UltraLife specimen cutting dies are individually serialized, hand-honed, and mirror polished. A protective coating of industrial enamel is applied to the non-cutting surfaces before undergoing a rigorous final inspection.
Each UltraLife specimen cutting die includes a detailed final report and certification to the applicable standard, traceable to NIST, and compliant with ISO 9001:2000 and ISO/IEC 17025. The specimen dies are placed in a plastic, blow-molded, ‘clam shell’ style case with a foam lining to protect the die during transport and storage.
CCSi UltraLife Specimen Dies: Features
The CCSi Specimen Cutting Dies Feature:
  1. Exclusive UltraLife cutting edge technology;
  2. Designed with advanced 3D solid modeling;
  3. High carbon content A2 tool steel;
  4. Manufactured using computerized systems and techniques;
  5. EDM (Electrical Discharge Machining);
  6. CNC (Computer Numerical Control) 4 axis machining;
  7. Precision ground;
  8. Expertly honed;
  9. Finely polished;
  10. Protective industrial enamel coating;
  11. Plastic, foam lined, protective case;
  12. Traceability of dimensional measurement to NIST;
  13. Certification to ASTM D945;
  14. Compliance with ISO 9001:2000 and ISO/IEC 17025;
Available in:
  1. Part A (solid rubber) die in SI dimensional units;
  2. Part A (solid rubber) die in U.S. Customary dimensional units;
  3. Part A (cellular materials) ‘rotating die’ with integral spindle;
  4. Part B die in SI dimensional units;
  5. Part B die in U.S. Customary dimensional units;
  6. Mallet handle, arbor press mount, & press adapter versions for the Part A (solid rubber) die;
  7. Mallet handle, arbor press mount, & press adapter versions for the Part B die.
CCSi UltraLife ASTM D945 Specimen Cutting Dies: Specifications & Pricing
Part Number Description Dimensions
CCSi-D945-Ansi D945 SI Part A (solid rubber) no mounting device 19.5 ± 0.13 mm Ø
CCSi-D945-Aasi D945 SI Part A Die with arbor press mount
CCSi-D945-Apsi D945 SI Part A Die with press adapter
CCSi-D945-Amsi D945 SI Part A Die with mallet handle
CCSi-D945-Anus D945 US Part A (solid rubber) no mounting device 0.75 ± 0.005 inch Ø
CCSi-D945-Aaus D945 US Part A Die with arbor press mount
CCSi-D945-Apus D945 US Part A Die with press adapter
CCSi-D945-Amus D945 US Part A Die with mallet handle
CCSi-D945-Ac D945 Die Part A (cellular materials)
SI and US units are equivalent
43.70 ± 0.01 mm ID
(1.720 ± 0.001 inch)
CCSi-D945-Bnsi D945 SI Part B Die without mounting device 12.7 ± 0.02 x 23.62 ± 0.02 mm
CCSi-D945-Basi D945 SI Part B Die with arbor press mount
CCSi-D945-Bpsi D945 SI Part B Die with press adapter
CCSi-D945-Bmsi D945 SI Part B Die with mallet handle
CCSi-D945-Bnus D945 US Part B Die without mounting device 0.50 ± 0.001 x 0.884 ± 0.010
CCSi-D945-Baus D945 US Part B Die with arbor press mount
CCSi-D945-Bpus D945 US Part B Die with press adapter
CCSi-D945-Bmus D945 US Part B Die with mallet handle
Please Request a Quotation for current pricing and delivery.

Index Terms: specimen dies, cutting dies, D945, ASTM D945, chronograph, compression, creep, deflection, deformation, dynamic modulus, elevated temperature, hysterisis, initial creep, kinetic energy, low temperature, mechanical oscillograph, oscillograph, point modulus, resilience, set, shear, static modulus, strain, stress, subnormal temperature, tangent modulus, Yerzley, Yerzley mechanical oscillograph, Yerzley oscillograph, Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph).
Copyright © 2006 CCSi, Inc. • All Rights Reserved • Published August, 2006
Corporate Consulting, Service & Instruments, Incorporated
221 Beaver Street • Akron, Ohio 44304 USA
Telephone: 800.742.8535 / 330.376.3600 • Facsimile: 800.229.9329 / 330.376.8500
www.ccsi-inc.com www.orecozone.net