back  request for quotation (rfq) request for information (rfi) Adobe® PDF Document download bookmark this page home
CCSi UltraLife Specimen Cutting Dies: ASTM D816
CCSi is offering a 10% discount on our UltraLife Specimen Cutting Dies during December, 2010.
All purchase orders must be postmarked or recieved no later than January 5th, 2011 to qualify.
ASTM D816 Method B Shear Adhesion Specimen Cutting Die
UltraLife Method B Die

ASTM D816 Method C Specimen Cutting Die
UltraLife Method C Die
UltraLife Cutting Dies by CCSi
CCSi manufactures these high quality UltraLife Specimen Cutting Dies to measure the properties of adhesives (rubber cements) that may be applied in a plastic or fluid state, and are manufactured from natural rubber; reclaimed rubber; synthetic elastomers; or compositions of these materials, as described in ASTM D816Standard Test Methods for Rubber Cements’.
The tests provide standard procedures for evaluating important properties of adhesives ordinarily classed as rubber cements.
The method consists of nine individual tests, five of which do not require specimen preparation using cutting dies. Three, of the remaining four, employ the Method B adhesion shear specimen described below.
The Adhesion Test is divided in to three parts:
  1. Test Method A — Adhesion Strength in Tension;
  2. Test Method B — Adhesion Strength in Shear;
  3. Test Method C — Adhesion Strength by Stripping Method.
Adhesion Test Method A employs the procedure described in ASTM D429Standard Test Methods for Rubber Property — Adhesion to Rigid Substrates’, for which CCSi the appropriate mold. Please refer to the CCSi ASTM D429 UltraLife Mold pages for more information.
Adhesion Test Method B requires rectangular test specimens measuring 25 x 125 mm (1 x 5 inch). While Adhesion Test Method C requires rectangular test specimens measuring 25 x 150 mm (1 x 6 inch). These are, a bit confusingly, regarded as Type 1 (lapped configuration) and Type 2 (sandwich arrangement) specimens.
CCSi UltraLife Specimen Dies: Quality Manufacturing
CCSi UltraLife specimen cutting dies are manufactured from homogenous, solid, high carbon content A2 tool steel. Each undergoes multi-axis precision grinding and conventional, plunge, or wire EDM (Electrical Discharge Machining) processes ... producing a world-class, close tolerance die.
Precision grinding and EDM processes ensure true parallelism and multi-plane dimensional accuracy. The quality of materials, design, and engineering serve to provide the highest specimen quality possible, over an extended service life.
Where highly technical manufacturing techniques and processes end ... old-world craftsmanship begins!
CCSi UltraLife specimen cutting dies are individually serialized, hand-honed, and mirror polished. A protective coating of industrial enamel is applied to the non-cutting surfaces before undergoing a rigorous final inspection.
Each UltraLife specimen cutting die includes a detailed final report and certification to the applicable standard, traceable to NIST, and compliant with ISO 9001:2000 and ISO/IEC 17025. The specimen dies are placed in a plastic, blow-molded, ‘clam shell’ style case with a foam lining to protect the die during transport and storage.
CCSi UltraLife Specimen Dies: Features
The CCSi Specimen Cutting Dies Feature:
  1. Exclusive UltraLife cutting edge technology;
  2. Designed with advanced 3D solid modeling;
  3. High carbon content A2 tool steel;
  4. Manufactured using computerized systems and techniques;
  5. EDM (Electrical Discharge Machining);
  6. CNC (Computer Numerical Control) 4 axis machining;
  7. Precision ground;
  8. Expertly honed;
  9. Finely polished;
  10. Protective industrial enamel coating;
  11. Plastic, foam lined, protective case;
  12. Traceability of dimensional measurement to NIST;
  13. Certification to ASTM D816;
  14. Compliance with ISO 9001:2000 and ISO/IEC 17025;
Available in:
  1. ASTM D816 Method B and Method C (Type 1 and Type 2);
  2. Mallet handle, arbor press mount, & press adapter versions.
CCSi UltraLife ASTM D816 Specimen Cutting Dies: Specifications & Pricing
Part Number Description Dimensions
CCSi-D816-Bn D816 Method B Die without mounting device 25 x 125 mm (0.98 x 4.92 inch)
CCSi-D816-Ba D816 Method B with arbor press mount
CCSi-D816-Bp D816 Method B Die with press adapter
CCSi-D816-Bm D816 Method B Die with mallet handle
CCSi-D816-Cn D816 Method C Die without mounting device 25 x 150 mm (0.98 x 5.91 inch)
CCSi-D816-Ca D816 Method C with arbor press mount
CCSi-D816-Bp D816 Method C Die with press adapter
CCSi-D816-Cm D816 Method C Die with mallet handle
Please Request a Quotation for current pricing and delivery.

Index Terms: specimen dies, cutting dies, D816, ASTM D816, adhesion, adhesion strength, adhesion strength in shear, adhesion strength in tension, adhesion strength by stripping method, adhesive, bond durability, double shear test piece, rubber cement, rubber adhesive, rubber to metal bond, Standard Test Methods for Rubber Cements, Standard Test Methods for Rubber Property - Adhesion to Rigid Substrates, D429, ASTM D429.
Copyright © 2006 CCSi, Inc. • All Rights Reserved • Published August, 2006
Corporate Consulting, Service & Instruments, Incorporated
221 Beaver Street • Akron, Ohio 44304 USA
Telephone: 800.742.8535 / 330.376.3600 • Facsimile: 800.229.9329 / 330.376.8500
www.ccsi-inc.com www.orecozone.net