back  request for quotation (rfq) request for information (rfi) Adobe® PDF Document download bookmark this page home
CCSi UltraLife Specimen Cutting Dies: ASTM D413
CCSi is offering a 10% discount on our UltraLife Specimen Cutting Dies during December, 2010.
All purchase orders must be postmarked or recieved no later than January 5th, 2011 to qualify.
ASTM D413 Specimen Cutting Die
UltraLife ASTM D413 Specimen Die
UltraLife Cutting Dies by CCSi
CCSi manufactures these high quality UltraLife Specimen Cutting Dies for the determination of the adhesion strength between plies of fabric bonded with rubber or the adhesion of the rubber layer in articles made from rubber attached to another material, as indicated in ASTM D413Standard Test Methods for Rubber Property — Adhesion to Flexible Substrate’.
The strip specimens, Type A and Type B, are specified in ASTM D413 only with regard to their width, the length being dependent upon the end user's requirements. Therefore, these dies are manufactured individually to the specifications enumerated by the user. CCSi cutting dies are available with mallet handles, arbor press mounts, or press adapters, which facilitate the user's specific specimen preparation protocol.
The ASTM D413 Type B test specimens require that the edges be buffed after cutting. CCSi features the Emerson Type Rubber Buffer and the Hung Ta™ Par-Marton Type Specimen Adjuster, both of which are suitable for this application and comply with the requirements of ASTM D3183Standard Practice for Rubber — Preparation of Pieces for Test Purposes from Products’.
CCSi UltraLife Specimen Dies: Quality Manufacturing
CCSi UltraLife specimen cutting dies are manufactured from homogenous, solid, high carbon content A2 tool steel. Each undergoes multi-axis precision grinding and conventional, plunge, or wire EDM (Electrical Discharge Machining) processes ... producing a world-class, close tolerance die.
Precision grinding and EDM processes ensure true parallelism and multi-plane dimensional accuracy. The quality of materials, design, and engineering serve to provide the highest specimen quality possible, over an extended service life.
Where highly technical manufacturing techniques and processes end ... old-world craftsmanship begins!
CCSi UltraLife specimen cutting dies are individually serialized, hand-honed, and mirror polished. A protective coating of industrial enamel is applied to the non-cutting surfaces before undergoing a rigorous final inspection.
Each UltraLife specimen cutting die includes a detailed final report and certification to the applicable standard, traceable to NIST, and compliant with ISO 9001:2000 and ISO/IEC 17025. The specimen dies are placed in a plastic, blow-molded, ‘clam shell’ style case with a foam lining to protect the die during transport and storage.
CCSi UltraLife Specimen Dies: Features
The CCSi Specimen Cutting Dies Feature:
  1. Exclusive UltraLife cutting edge technology;
  2. Designed with advanced 3D solid modeling;
  3. High carbon content A2 tool steel;
  4. Manufactured using computerized systems and techniques;
  5. EDM (Electrical Discharge Machining);
  6. CNC (Computer Numerical Control) 4 axis machining;
  7. Precision ground;
  8. Expertly honed;
  9. Finely polished;
  10. Protective industrial enamel coating;
  11. Plastic, foam lined, protective case;
  12. Traceability of dimensional measurement to NIST;
  13. Certification to ASTM D413;
  14. Compliance with ISO 9001:2000 and ISO/IEC 17025;
Available in:
  1. ASTM D413 Type A and Type B;
  2. Mallet handle, arbor press mount, & press adapter versions;
  3. Manufactured to user's specifications.
CCSi UltraLife ASTM D413 Specimen Cutting Dies: Specifications & Pricing
Part Number Description Width NOTE Length
CCSi-D413-An D413 A Die without mounting device 25.0 +3/-0 mm
(1.0 +0.125/-0 inch)
User
Defined
CCSi-D413-Aa D413 A Die with arbor press mount
CCSi-D413-Ap D413 A Die with press adapter
CCSi-D413-Am D413 A Die with mallet handle
CCSi-D413-Bn D413 B Die without mounting device 35.0 (1.375 inch)
buff to 30 mm
User
Defined
CCSi-D413-Ba D413 B Die with arbor press mount
CCSi-D413-Bp D413 B Die with press adapter
CCSi-D413-Bm D413 B Die with mallet handle
Please Request a Quotation for current pricing and delivery.
NOTE The dimensions for width may also be modified (within the stated tolerance) to the user's specifications. The manufacturing tolerance being ± 0.1 mm (± 0.004 inch) of the overall dimension defined by the user.

Index Terms: specimen dies, cutting dies, Standard Test Methods for Rubber Property - Adhesion to Flexible Substrate, ASTM D413, D413, adhesion, flex adhesion, static mass method, adherence, adhesion test, flexible substrate, rupture, tear, fabric, rubber, bond strength, rubber to fabric bond, Emerson type rubber buffer, Par-Marton type specimen adjuster.
Copyright © 2006 CCSi, Inc. • All Rights Reserved • Published July, 2006
Corporate Consulting, Service & Instruments, Incorporated
221 Beaver Street • Akron, Ohio 44304 USA
Telephone: 800.742.8535 / 330.376.3600 • Facsimile: 800.229.9329 / 330.376.8500
www.ccsi-inc.com www.orecozone.net